U.S. Solid Stainless Steel Electric Solenoid Valve 110VAC Normally Closed Air Water (1/2 Inch)($48.23Value)

Description

Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc. This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants. This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance. PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves. As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it. The U.S. Solid normally closed (N/C) electric solenoid valve has a stainless steel body, 1/2 inch female NPT threaded connections, and a Viton gasket. It is suitable for hot or cold water, air, natural gas, oils, very low viscosity fluids (below 20 cst), diesel fuel, and kerosene. Customers choose this general-purpose valve for do-it-yourself projects, moderate-temperature applications, irrigation systems, reverse osmosis systems, and home brewing.

Specifications:
Model: USS2-00070
Port Size: 1/2 inch
Thread Type: NPT
Body Material: Stainless Steel
Gasket / Diaphragm / Seal: Viton
Operation Type: Semi-Direct Lift Valve
Operation Mode: Normally Closed
Wiring Type: Lead Wire
Rated Voltage: AC 110 V, plus or minus 10 percent
Power: 21 VA
IP Rating: IP65
Flow Aperture: 16 mm
Flow Value: 4.8 Cv
Operating Time: 1 second or less
Operating Pressure: 0 to 7 bar (0 to 101 psi) for air, water, diesel fuel, and kerosene; 0 to 5 bar (0 to 72 psi) for oil
Operating Temperature: 14°F to 248°F (-10°C to 120°C)
Suitable Media: air, water, oil, natural gas, diesel fuel, kerosene
Not for strong acids, strong bases, waste water, industrial gas, or media with heavy impurities
Net Weight: 1.65 lbs
Product Dimensions: 4.31 x 2.94 x 2.23 inches
Note: Do not energize the valve continuously for more than 8 hours...