Seco-Larm Enforcer Quad Photobeam Detectors, 330-660 Ft. Range (E-964-Q330Q)($329.00Value)

Description

Designed to provide reliable perimeter security both indoors and outdoors Easy-to-install with laser beam alignment Quad infrared beams minimize false alarms from falling leaves, birds, etc. Anti-frost system with built-in heater so that beam functions even in extreme conditions NO/NC alarm output

Secure the perimeter around your home or property with Seco-Larm Enforcer Quad Photobeam Detectors. Quad photobeam detectors feature extended ranges that are ideal for long-distance protection. When the infrared light beams are broken, the sensors are activated and alert you to the intruder, helping you keep your home safe and secure.

• Four selectable beam frequencies eliminate interference
• Beam strength LED indicators
• Audible beam alignment (buzzer)
• Built-in heater for indoor or outdoor use
• NO/NC alarm output

Reduces False Alarms

Because all four beams must be simultaneously broken for activation, false alarms created by animals and falling leaves are minimized.

Built for Extreme Conditions

A built-in heater automatically turns on and off depending on the outside temperature. An environmental control output senses a slow degradation in beam strength when weather conditions worsen preventing false alarms. Lensed optics reinforce beam strength and provide excellent immunity to false alarms due to rain, snow, mist etc.

Easy to Align and Install

The built-in laser and visual alignment systems quickly and easily pinpoint the approximate mounting location for the transmitter and aid in aligning the transmitter and receiver units once mounted. A beam strength indicator clearly displays the strength of the beam at the receiver with 5 LEDs. Four selectable beam frequencies allow for superior perimeter protection by eliminating crosstalk and interference between multiple units.

Contents

• Enforcer Quad Photobeam Detector (Transmitter)
• Enforcer Quad Photobeam Detector (Receiver)
• Beam alignment template
• Manual

Technical Details

• MPN: E-964-Q330Q
• UPC: 676544000976
• Max. range (outdoor): Up to 330 Ft. (100m)
• Max. range (indoor): Up to 660 Ft. (200m)
• Current (Tx, Rx): 100mA
• Current (Tx, Rx, heaters): 260mA
• Input voltage: 12 to 24 VAC/VDC (non-polarity)
• Delay time: 50 milliseconds to 700 milliseconds (variable)
• Detection method: All 4 beams simultaneously broken
• Selectable beam frequencies: Four (4) channels
• Alarm output: Form "C" relay COM/N.O./N.C. 1A at 125VAC/24VDC
• Tamper output (Tx & Rx): NC switch, 1A at 120VAC
• Environmental output: Selectable N.O. or N.C. 1A at 125VAC/24VDC
• Beam-strength indicator: 5 LEDs indicate signal strength from high to low
• Signal LED (Rx): Red LED ON – beam is broken or Tx and Rx out of alignment
• Power LED (Tx & Rx): Green LED – illuminated when power is on
• Laser wavelength: 650nm
• Alignment angle:
• Horizontal: ±900
• Vertical: ±150
• Operating temperature: -13 to 131 degrees F (-250 to 55 degrees C)
• Weight: 5.7 pounds (2.6kg)
• Ingress protection: IP55
• Case: PC Resin
• Dimensions: 15-1/4 x 4-7/16 x 4-11/32 inches (387 x 113 x 110mm)
• Warranty: 1 Year