1" 5x4.5 Hubcentric Wheel Spacers - Fits Ford Mustang Ranger Explorer Edge - 1 Inch (25mm), 5x114.3, 70.5mm Hub, 1/2x20 Studs - Pair of 2 - Black($51.73Value)

Description

Vehicle Bolt Pattern: 5x4.5 Wheel Bolt Pattern: 5x4.5 Hub Bore: 70.5mm Thread Pitch: 1/2x20 Thickness: Each Spacer Measures 1" Thick THESE SPACERS WILL FITS ONTO THE FOLLOWING VEHICLES

Fits Ford:

• 1952-1954 Crestline
• 1992-2011 Crown Victoria
• 1955-1967 Fairlane
• 1962-1967 Falcon
• 2005-2007 Five Hundred
• 1960-1974 Galaxie
• 1952-1954 Mainline
• 1967-1973 Mustang
• 1994-2014 Mustang
• 1958-1971 Thunderbird
• 2007-2010 Edge
• 1991-2010 Explorer
• 1991-2011 Ranger (Will NOT fit the front of the vehicle if manual locking hubs are installed. Will NOT fit front of 2WD hub)
• 1982-1990 Bronco II (Does not fit XLT Model)

Fits Lincoln:

• 1984-1992 Mark 7
• 1982-2004 Town Car

Fits Mercury:

• 1996-2010 Mountaineer

Fits Mazda:

• 1991-1994 Navajo
• 1998-2009 B Series

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

1. Your lugs studs will need to be shortened by grinding them down
2. You can replace your studs will shorter studs
3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS