Manual Corner Notcher, 4 x 4 in, KAKA INDUSTRIAL HN-1104 | 3 mm sheet capacity, 90 degree fixed notch($929.59Value)

Description

Manual Corner Notcher for Sheet Metal: The HN-1104 is a hand-operated corner notcher designed for fixed 90 degree sheet metal notching, corner cuts, coping, and trimming work in fabrication shops, maintenance areas, and metalworking workstations. 4 x 4 in Fixed 90 Degree Capacity: Based on the KAKA manual, the notcher handles 100 x 100 mm / 4 x 4 in notches at a fixed right angle, helping users prepare box corners, ductwork joints, enclosures, brackets, and other sheet metal parts. 3 mm / 0.12 in Sheet Capacity: The source manual lists 3 mm thickness and notes the capacity is based on plates with 400 N/mm2 tensile strength. For US buyers, this is approximately 11 gauge mild steel, depending on material type and standard. Guide Plates and Fine Scales: Adjustable guide plates and fine reading scales help position workpieces for repeat notches, while the 30 mm / 1.2 in ram stroke supports controlled manual cutting through rated sheet material. Shop-Ready Manual Design: With a 46 x 45 x 76 cm / 18 x 18 x 30 in packing size and 90/105 kg / 198/231 lb N.W./G.W., the HN-1104 is a substantial bench or stand-mounted hand notcher for repeated sheet metal corner work. Please be expecting a phone call from the freight carrier to schedule your delivery appointment. Please note that someone must be present at the delivery address to receive the shipment and sign for it. If your address is a residential location, we strongly recommend requesting a liftgate service for your delivery, as the truck will not have a loading dock.

KAKA INDUSTRIAL HN-1104 is a manual corner notcher for fixed 90 degree sheet metal notching, corner cuts, coping, and trimming work.

The HN-1104, also referenced as HN-3/102 in the KAKA manual, is designed for hand-operated notching of sheet material at a right angle. It is suitable for fabrication layouts that require clean corner removal, box and enclosure corners, ductwork joints, brackets, and sheet metal preparation before forming or assembly.

• 4 x 4 in notching capacity: The manual lists 100 x 100 mm punch capacity and 90 degree angle capacity.
• 3 mm / 0.12 in sheet capacity: Capacity is stated for plates with tensile strength of 400 N/mm2; adjust expectations for harder or softer materials.
• Fixed 90 degree operation: Designed for right-angle sheet notching rather than variable-angle cutting.
• Adjustable guides: Guide plates and fine scales help users position sheet material for repeat work.
• Manual cutting stroke: The listed ram stroke is 30 mm / 1.2 in for hand-operated notching.

Always keep hands clear of the cutting area, use proper material support, and do not exceed the rated capacity. For stainless steel, aluminum, or other materials, confirm thickness compatibility based on material strength and blade condition before production use.