ECCPP 4PCS 1 inch 4x100 Wheel Spacers for toyota for Yaris 2007-2020 | 54.1mm CB 12x1.5 Studs Wheel Adapters for Toyota MR2 Spyder 2000-2006($64.99Value)

Description

【Fitments Include】4x100 to 4x100 Hubcentric Wheel Spacers Fit for 2007-2020 for toyota for Yaris| 2012-2019 for toyota for Prius C |2000-2005 for toyota for MR2 Spyder |2000-2005 for toyota for Echo.The back of the wheel must sit flush on the Wheel Spacers/Adapter The studs on the vehicle cannot stick past the face of the adapter. If they do,you may need to modify by grinding/trimming 【Specifications】1 Inch 4 Lug Wheel Spacers Hubcentric with Vehicle Bolt Pattern:4x100;Wheel Bolt Pattern:4x100;Thread PInch:12x1.5;Thickness:1" or 25mm;Inner Diameter:54.1mm,Outer Diameter(5.511 Inch); (Vibration can be avoided by simply following the recommended torque for installation, keeping the Wheel Adapters & Spacers tight against the hub and Clean the rust of wheel and hub surfaces) 【Key Functions】Our 4x100 Wheel Spacers (1)Creates additional clearance between tire and hub assembly for custom wheel fitment.(2)Delivers an aggressive outward‑stance appearance for your vehicle.(3)Widens wheel track width for custom offset setup.(4)Helps prevent rubbing against sway‑bar components when running larger‑size tires 【Performance Enhancement‌】The 25mm Wheel Spacers Hubcentric 4x100 are Constructed from high‑quality forged 6061‑T6 billet aluminum alloy with CNC precision machining. Features surface to defend against harsh environmental conditions. CNC automatic processing delivers tight dimensional accuracy. These forged 6061‑T6 aircraft‑grade aluminum wheel spacers offer enhanced mechanical strength 【Garage Checking】4 Lug Wheel Spacers Hubcentric 25mm Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.5mm threads; 2) You have more than 1 Inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 Inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 54.1mm 【Installation Notes】The use of a thread lock adhesive is encourage for installing.The back of the wheel must sit flush on the wheel spacers/adapter.The studs on the vehicle cannot stick past the face of the the wheel spacers/adapter. If they do,you may need to modify by grinding/trimming Fitments:

1991-1994 for 323

1989-2005 for Miata

1992-1995 for MX-3

1991-1998 for Protege



2004-2007 for xA

2004-2007 for xB



1986-1991 for Celica (Does not fit GTS Models)

1988-2002 for Corolla

2000-2005 for Echo

1985-1989 for MR2

2000-2005 for MR2 Spyder

1992-1999 for Paseo

2001-2003 for PRIUS

1989-2002 for Tercel

2007-2011 for YARIS



Package Including：

2 Wheel Spacers+8 Lug Nuts