3pcs Pro Micro 5V 16MHz Module Board 2 Row Pin Header for Arduino Mini (Pro Micro*3)($21.99Value)

Description

【ATmega32U4 microcontroller】-The ProMicro is similar to the Pro Mini except with an 32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. 【Multi-channels】-This tiny little board does all of the neat tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. 【USB Port Reinforced】-This latest revision reinforced the USB port and make it more stronger solder points. 【Voltage regulator】-There is a voltage regulator on board so it can accept voltage up to 9V DC.The maximum voltage allowed on the RAW pin is 9V, 6-7V input recommended. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC. 【Anti-ESD Package】The boards came in a box package with a pinout diagram printed on, each in their own anti-ESD (Electronic Static Discharge) bag with 3 rows of header pins.

Note: When you open the IDE software, please go to the Tool and choose the board "Leonardo" or
"Genuino Micro"

Feature:
Running at 5V/16MHz
Supported under Arduino IDE
On-Board micro-USB connector for programming
9x 10-bit ADC pins
12x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
dimension: 33.5 x 18.5 mm(1.3 x 0.7 inch)

Package includes:
Pro Micro Module for arduino