Winford Engineering DB25 Male Breakout Board, Straight Connector, Spring Clamp Terminal Block, DIN Rail Mount($24.50Value)

Description

Available with Right Angle or Straight connector orientation Quick connection spring terminal blocks for all pins, plus shield Available in DIN Rail Mount or Panel Mount mounting styles Solder pad connection holes, one (1) per line Spring terminals accomodate wire sizes from 16AWG to 24AWG These breakout boards bring all 25 pins of a DB25 connector out to spring connection terminal blocks for quick, easy, secure connections. Each connector pin is also brought to solder pads which allow easy access for testing or the addition of soldered components. The solder pads are arranged on standard 0.1" spacing, supporting the addition of standard pitch components such as pin headers. Please note that the breakout boards are manufactured with a connection between each connector pin and the corresponding terminal block position; no soldering of any type is necessary. The solder pads simply provide an area for making optional connections to additional headers or other components. This breakout board features push-in spring connection terminal blocks. These screwless, spring clamp terminal blocks allow connections to be made very quickly and efficiently. The spring terminal connections are reliable and secure, but wires can be connected and disconnected in a fraction of the time required with standard screw terminal blocks. Simply depress the actuator button on top of the terminal block, insert or remove the wire, and release the button. The connection is strong and secure. In addition, spring connections can offer better results in environments where vibration could potentially loosen standard screw terminal block connections. These products are available in two different mounting variants. Product numbers ending with -DIN come with DIN clips already installed and ready to snap onto 35mm or 32mm DIN rail. Product numbers ending with -N have no mounting hardware included; they can be easily panel-mounted by using 1/4" nylon standoffs under the mounting holes, and #6 screws.