SEAFLO Bilge Blower, 320 CFM 12V DC 4-Inch Flex-Mount Marine Ventilation Fan with Ignition-Protected Motor for Engine Compartments, Bilges, Galleys($69.99Value)

Description

[ SPECIFICATIONS ]: Model: SFBB1-320-02; Series: 02 Series; Product Type: Flex-mount centrifugal bilge blower; Voltage: 12V DC; Airflow: 320 CFM (550 m³/h); Maximum Current Draw: 11A; Recommended Fuse: 16A; Duct Compatibility: 4 in. (102 mm); Mounting Configuration: Flex mount; Housing: White corrosion-resistant ABS plastic; Intended Application: Ducted marine ventilation. [ 4-YEAR WARRANTY ]: Backed by SEAFLO’s four-year warranty for added confidence and long-term product support. The durable ABS housing, sealed motor shaft and corrosion-resistant construction are engineered for dependable service in challenging marine environments when properly installed, operated and maintained. [ 4-YEAR WARRANTY ]: Backed by SEAFLO’s four-year limited warranty, providing added confidence and dependable product support for marine ventilation installations. The warranty reflects SEAFLO’s commitment to reliable construction, consistent performance and long-term customer satisfaction for boat, yacht and vessel owners. [ 320 CFM HIGH-OUTPUT AIRFLOW ]: The SFBB1-320-02 delivers 320 CFM (550 m³/h) of airflow to support powered ventilation in enclosed marine compartments. Its high-volume output helps move air through a dedicated duct system serving engine compartments, bilges, galleys, marine heads and other enclosed onboard areas [ FLEX-MOUNT INSTALLATION ]: The flex-mount configuration allows the blower to be secured to an available flat mounting surface rather than requiring the unit to connect directly to an exterior vent. This provides greater freedom to position the blower around engines, tanks, wiring and structural components in confined marine layouts. [ 4-INCH DUCT COMPATIBILITY ]: Designed for use with 4 in. (102 mm) flexible ventilation ducting, the blower supports a ducted connection at both the intake and discharge sides. Flexible hose routing helps connect an enclosed compartment to an exterior ventilation opening when the mounting surface and vent are not directly aligned. [ CENTRIFUGAL AIRFLOW DESIGN ]: Air enters through the center intake, moves through the curved centrifugal blower housing and exits through the side discharge. This defined airflow path allows flexible ducting to carry air from the enclosed compartment through the blower and toward the boat’s exterior ventilation opening. [ IGNITION-PROTECTED MOTOR ]: The motor is identified as ignition protected for marine ventilation installations. This construction is especially important in engine-compartment and bilge applications where electrical equipment must be selected and installed appropriately. Follow all vessel ventilation, wiring, fuse and pre-start blower procedures [ SEALED MARINE CONSTRUCTION ]: Front and rear shaft seals and a sealed motor shaft help protect critical motor components from moisture encountered in marine compartments. The enclosed design supports dependable operation while the durable mounting structure keeps the blower secured during normal vessel movement and vibration [ CORROSION-RESISTANT ABS HOUSING ]: The white ABS plastic housing is designed to resist corrosion and support regular use in marine environments. The lightweight molded construction protects the centrifugal blower assembly while providing a practical housing for installation aboard boats, yachts and other vessels. The SEAFLO SFBB1-320-02 Flex-Mount Bilge Blower is a 12V DC centrifugal ventilation fan designed to move air through ducted systems aboard boats and other marine vessels. Delivering 320 CFM (550 m³/h), it supports powered ventilation in engine compartments, bilges, galleys, marine heads and other enclosed onboard spaces where controlled air movement is required. (SEAFLO) The blower uses a centrifugal airflow configuration in which air enters through the center intake, moves through the curved housing and exits through the side discharge. Its flex-mount design allows the blower to be positioned on an available mounting surface while 4 in. (102 mm) flexible ducting connects the intake and discharge pathways. This configuration provides additional routing freedom around engines, tanks, wiring and structural supports. (Seaflo Direct) The SFBB1-320-02 features an ignition-protected motor, sealed motor shaft, front and rear shaft seals and a corrosion-resistant white ABS housing for marine installations. The 12V blower has an 11A maximum current draw and requires a recommended 16A fuse. Installation and operating instructions are included; mounting screws are not included. The blower is backed by SEAFLO’s four-year limited warranty. (SEAFLO)