CMO 5mm 5x114.3 Wheel Spacers Fits Honda Accord, CR-V and Acura RSX 2PCS | Fits S2000 Rear, Civic, Element; TL, TSX, MDX, NSX Rear, TLX; 64.1mm Bore/($24.95Value)

Description

[VEHICLE FITMENT] Fits Honda Accord 1998-2026, CR-V 1997-2026, S2000 2000-2008 rear hubs only, Civic 2005-2026, Element 2003-2011, Odyssey 1995-2004 and Crosstour 2010-2015; Acura RSX 2002-2006, TL 1995-2008, TSX 2004-2014, TLX 2015-2020, Integra Type R 1997-2001, Integra Base/A-Spec 2023-2026 and NSX 1992-2005 rear hubs only. At 5mm, verify lug-nut thread engagement and wheel centering. Confirm trim, brakes and wheels through Amazon fitment. [PRODUCT SPECIFICATION] Includes 2 silver anodized forged 6061-T6 slip-on spacers, each 5mm thick, with a 5x114.3 bolt pattern, 64.1mm bore and no wheel-side hub lip. Designed for vehicles using M12x1.5 studs; extended studs and lug nuts are not included. Verify wheel bore, offset, backspacing and available fender and suspension clearance before ordering. [4-AXIS CNC PRECISION] Consistent bolt-hole placement, uniform thickness and flat mounting faces support accurate alignment and even seating. The machined 64.1mm bore helps align the spacer on a matching vehicle hub. Because this design has no wheel-side hub lip, verify wheel centering and full, gap-free contact during installation. [SGS TESTED MATERIALS] Forged 6061-T6 aluminum combines strength, low weight and consistent material structure for dependable load support. The anodized finish helps resist oxidation, corrosion and surface wear. The aluminum material is SGS Tested. [CHECK THREAD ENGAGEMENT] A 5mm slip-on spacer reduces usable stud length. Confirm sufficient lug-nut engagement before driving; extended studs may be required and are not included. Keep all mating surfaces clean and fully flush with no contact or gap. Torque to the vehicle manufacturer's specification and recheck after 25-50 miles. Professional installation is recommended. [PRODUCT PURPOSE]
These CMO 5x114.3 wheel spacers move each wheel outward 5mm. The package includes 2 anodized forged 6061-T6 slip-on spacers with a 64.1mm bore and no wheel-side hub lip. Confirm 5x114.3 PCD, 64.1mm hub bore, M12x1.5 hardware, wheel bore, offset and backspacing before ordering.

[VERIFIED U.S. FITMENT]
Fits Honda Accord 1998-2026, CR-V 1997-2026, S2000 2000-2008 (rear hub only), Civic 2005-2026, Element 2003-2011, Pilot 2003-2008, Prelude 1997-2001, CR-Z 2011-2016, HR-V 2016-2026, Accord Crosstour/Crosstour 2010-2015, Odyssey 1995-2004, Clarity 2017-2021 and Insight 2019-2022; Acura RSX 2002-2006, TL 1995-2008, TSX 2004-2014, TLX 2015-2020, Integra Type R 1997-2001, RDX 2007-2026, ILX 2013-2022, MDX 2001-2006/2014-2016, NSX 1992-2005 (rear hub only), CL 2001-2003, RL 1996-2004 and Integra Base/A-Spec 2023-2026. Fitment varies by trim, brakes and wheels; confirm through Amazon fitment.

[PRECISION AND MATERIAL]
4-axis CNC machining supports consistent bolt-hole placement, uniform thickness and flat mounting faces. Forged 6061-T6 aluminum combines strength and low weight; the anodized finish helps resist oxidation, corrosion and surface wear. The aluminum material is SGS Tested. This no-lip design does not provide wheel-side hubcentric centering.

[INSTALLATION]
A 5mm slip-on spacer reduces usable stud length. Confirm sufficient lug-nut engagement before driving; extended studs may be required and are not included. Keep all mating surfaces clean and fully flush with no contact or gap. Torque to the vehicle manufacturer's specification and recheck after 25-50 miles. Professional installation is recommended.