SHDIATOOL Diamond Core Drill Bits Set for Porcelain Tile Granite Marble Stone Brick Vacuum Brazed Hole Saws 06 08 10 25 35 51mm (6 of Pack)($65.99Value)

Description

1. Application: 6 Pieces Different Diamond Hole saws for Porcelain Tile Granite Marble Brick Stones Masonry, brick... 2. Size: Diameter 6-16mm：35mm Max working depth, 10mm Diamond height, Total Length 62mm; Diameter 19-152mm：50mm Max working depth, 15mm Diamond height, Total Length 75mm 3. High quality: Better Diamond Grain provide fast and smooth drilling, but also ensure longer workable life. 4. Better Performance: The inside of the drill bit is filled with dense cooling wax for cooling the diamond bits (Size from 1/6-Inch to 1/2-Inch) 5. Machine: 5/8"-11 Female Thread, Recommended Machine: angle grinder, If you fit them on electric drill or other machine, you need an adapter Product Name:
Vacuum Brazed Diamond Dry Drilling Core Bits

Quantity:
6 Pieces Different Size
Size Included: 06mm(1/6"), 08mm(5/16"), 10mm(3/8"), 25mm(1"), 35mm(1-3/8") and 51mm(2")

Specification:
Diameter 6-16mm：35mm Max working depth, 10mm Diamond height, Total Length 62mm
6mm-16mm bits with Wax inside helps cooling the bits
Diameter 19-152mm：50mm Max working depth, 15mm Diamond height, Total Length 75mm
**The Thread of Drill bits are 5/8-Inch-11, Recommended Machine: angle grinder**
If you fit them on drill or other machine, you need an adapter, such as SDS, hex, Round plus shank...

Application :
Dry/wet drilling for porcelain tile, granite, marble, stone, Masonry, brick...

Feature:
1. 1.Fast and Smooth drilling
2. Long lifetime
3. Less Chipping
4. Minimizing any breakage
5. Less loss of material
6. Less heat generation
7. Better finish quality
================THE END================
Available Diameter: 6mm-152mm(1/6 Inch to 6 Inch).
Operation Tips for Vacuum Brazed Diamond Drill core bits
1.Do not use these drill bits with hammer mode
2.Only fit these drill bits on a cord drill, not cordless drill(no enough power)
3.Only for tile drilling not recommend for the material behind the tile
4.For horizontal drilling,just give a gentle pressure
For vertical drilling, the weight of the machine will give sufficient pressure
5.Start drilling as per following instructions:
1) Place the drill at a 45 degree angle
2) Drilling till the hole start to form
3) Bring the drill up into upright position
4) Continue to drill and swaying the machine along a circle