Drill Bit Hole Saw Guide - 1/4"- 3-1/4" Adjustable Tile Hole Cutter Centering Locator Holder Jig Fixture with Vacuum Suction Base for Ceramic, Tile,($11.89Value)

Description

High Quality Material - This hole saw guide is made of durable engineering grade ABS plastic that won't break easily and the tile hole locator is built to last. Adjustable Plate Size - Drill guide adjustable plate has a maximum opening length of 3-1/4", which is large enough to fit hole saws of various sizes. High Stability - Drill bit hole saw guide jig fixture vacuum suction cup with water cooling holes and keep the centering clamps on smooth surfaces. Easy to use and store - Engineering plastic, sealed bearing. Easy to store and can be used multiple times. Wide application - The drill saw guide with water cooling hole is widely used for drill bits to drill holes on tiles, glass, fish tanks, marble, granite, ceramics. Specification:
Material: Plastic
Size(LxW): Approx 18.5x15cm/ 7.28x5.91inch
Total Length: Approx. 25cm/ 9.84inch
Weight:400g/ 0.88pounds
Clamping Range: 4-80mm
Minimum Drill Bit Dimension: 1/4"
Maximum Hole Saw Dimension: 3-1/4"
You can reconfigure the bearings and the plates as you see fit for the specific application.
Guide for: Ceramic, Glass, Granite, Porcelain or any smooth surface where the suction cup base can hold on to - Including Walls

Package Includes: 1 × drill guide

Instructions:
1. Adjust the sliding plate for the size of the hole saw - drill bit you want to use. One side of the plate is for sizes up to 1-3/4 inches and flip the plate for larger sizes up to 3-1/4". For 1/8 inch drill bits, please remove the bearings.
2. Fix the guide using the suction base exactly where you want to drill the hole. Check the drill guide location and slider position before you start drilling. Measure - check twice and drill once.
3. Using water as a coolant, start the hole. You can spray the water or use the integrated hole.
4. Use the guide until the drill bit - hole saw makes an initial mark deep enough to keep the bit in position. You can remove the guide and continue drilling.
5. While drilling, keep using water to cool down the diamond drill bit - hole saw.

DIY TIPS:
1- This is a guide for diamond hole saws and its main function is to get the hole started on the right spot. Once the hole has started, the diamond hole saw will continue drilling. You will not have to use the guide all the way through the hole. After 1 minute of drilling, you can remove the guide. Guide and the ball bearings do not have to there for the whole duration of the process.
2- Diamond hole saw applications require water for cooling. Thanks to this water, the dust turns into mud. If water is used, there should not be any dust to contaminate the work area.
3- Diamond hole saws will cut in either direction. You can run your drill counterclockwise. If you use the drill counterclockwise, it will tighten all the nuts as you go. You won't need to worry about loose nuts and bolts.
4- This is a very versatile product and you can use it with or without the second plate.