AC Power Meter Digital Monitoring Multimeter Ammeter 100A 80-260V Voltmeter Energy Voltage Current Electrical Tester with CT($21.50Value)

Description

MULTIFUNCTIONAL: This is a multifunctional AC electric meter that can test current, voltage, power and energy with wide voltage range from 80V to 260V. ALARM SYSTEM: The meter support overload alarm function, reset energy function, power alarm threshold preset function, etc. BACK LIGHT LCD DISPLAY: This multimeter adopted a large LCD display with backlight function and the digits can be read clearly from various angles. SHOW 3 DATA THE SAME TIME: This power monitor could show 3 measured data at the same time, and you can simply press one button to switch power and energy data. WIRING DIAGRAM: The wiring diagram is on the back of this multimeter for convenient wiring. Input Voltage: 80~260VAC
Test Voltage: 80~260VAC
Rated Power: 22kW
Frequency: 45-65Hz
Measuring Accuracy: ±1.0%
Size: 67 x 57.5 x 24mm / 2.63 x 2.26 x 0.94"
Power Test Range: 0~22kW
Display Format: 0.0~.9W when <1kW;
1000~9999W when 1kW and <10kW;
10.0~22.0kW when 10kW and 22kW. 
Energy Test Range: 0~9999kWh 
Display Format: 0~9999Wh when <10kWh;
10~9999kWh when 10kWh and 9999kWh.
Automatically back to zero if over test range.
Voltage Test Range & Display Format: 80~260V
Current Test Range: 0~100A
Display Format: 0.00~99.99A

Instruction: 
1. Backlight: 
Press "light" button to open or close.
2. Energy Reset:
Step 1:Press and hold "set" button for more than 3 seconds until the energy display flashes;
Step 2:If press "set" button again, reset energy data and exit the reset state;
If press "light" button, exit the reset state without resetting energy data;
If no button is pressed for 10 seconds, exit the reset state without resetting energy data.
3. Power Alarm Value Reset:
Step 1:Press and hold "light" button for more than 3 seconds until the power display flashes;
Step 2:When the last digit of power display alarm value flashes, press "set" button to +1, press "light" button to switch to other digit. Alarm value cannot be more than 2.5kW
Step 3:Press and hold "light" button for more than 3 seconds or not press any button for more than 10 seconds to save value and exit.
4. Power/Energy Display Switch:
Press "set" button to switch display of power or cumulative energy data

Note: 
This indoor meter cannot be used in autotransformer, silicon controlled rectifier circuit or load.

Package Includes:
1 x Multimeter
1 x Current Transformer