LED Light Remote Controller IR Receiver Led Light Adapter Connector Set DC 12V 2A Power Supply Plug Adapter for 5050 2835 3528 Strip Lights($10.99Value)

Description

Notice！！ The connector is a male connector. Pulling out the male connector will become a female connector (can be pulled out if you don't need it)- as shown in the picture 3 RGB remote controller compatible used for 5050 2835 3528 LED RGB light strip, is dedicated to 4 pin led strips LED light adapter input: 110-240V. Output: DC 12V/2A ( US LED Power Supply Adapter is included ). If your light strip requires a 24V power supply voltage.Our power supply voltage is 12V, our power supply is connected to your light strip, the brightness of the light strip will be dim, or not working Notice ! ① Pull out the plastic cover on the buttom of remote before use. ② Connect box output port with led strip (arrows marks between control box and strip connector should be on same position). ③ Remote should be aimed at the ir receiver and without any obstacles.④ Indoor use only, keep away from water If the buttons don't control the right colors. First, you can press the remote control switch button , turn off the light strip. Then press the FADE7 button（the last button below the right）, The light strip will flash. Then press the switch button to turn on the light strip, the buttons can control the correct color. If not, repeat the above steps If the remote control kit does not work, and you have any problem, please contact us.We will provide many solutions to solve the problem Notice ! ! !

The connector can be a male connector or a female connector. Pulling out the male connector will become a female connector.

Adapters has positive and negative. The head arrow of the adapter should linking to the head arrow of the light strip.



Notice ! ! !
If the buttons don't control the right colors. First, you can press the remote control switch button , turn off the light strip. Then press the FADE7 button（the last button below the right）, The light strip will flash. Then press the switch button to turn on the light strip, the buttons can control the correct color. If not, repeat the above steps until the button can control the correct color. If you can end the operation.

Remote control doesn’t work. First, pull out the plastil piece before use. Then connect ir controller with led strip, it doesn’t work, disconnect the strip bar, reverse link. If the remote control still does not work, contact us to change a new one please.