YIZBAP 1in 5x4.5 to 5x4.75 Wheel Adapters for Corvette Wheels on Cherokee | 5x114.3mm to 5x120.65mm Wheel Adapter 73mm Hub Bore with 1/2-20 Thread($101.96Value)

Description

Specification: Vehicle Bolt Pattern 5x4.5'' (5x114.3mm). Wheel Bolt Pattern 5x4.75'' (5x120.65mm). Hub Bore: 73 mm. Thickness: 1 inch (25.4mm). Thread Pitch: 1/2-20 Threaded Studs. NOTE: ONLY WORKS with 5x4.75"(5x120.65mm) WHEELS on a 5x4.5"(5x114.3mm) Vehicle! NOT Fit 5x4.5"(5x114.3mm) WHEELS! Vehicle Compatible with 5x4.5'' (5x114.3mm) PCD: 1987-1990 Dakota; 2006-2014 Edge, 1990-2019 Explorer, 2001-2010 Explorer Sport Trac, 2005-2007 Five Hundred, 2008-2019 Flex, 2004-2007 Freestar, 1982-2012 Ranger, 1997-2010 Mountaineer;1984-2013 Cherokee, 1993-1998 Grand Cherokee, 2002-2013 Liberty, 1987-2006 Wrangler; 1981-2011 Town Car Wheel Compatible with 5x4.75''(5x120.65mm) PCD: 1997-2019 Corvette, 1982-2011 S10, 1983-2002 Camaro, 1997-2019 Corvette, 1983-1994 S10 Blazer; 1979-1985 Eldorado, 2004-2009 XLR; 1982-2002 Firebird Grade 12.9 Stud: The tensile strength is up to 1000MPa, which is much higher than that of 10.9-grade studs, which will ensure better structural support and higher driving safety Strict Quality Assurance: The wheel spacer is made of 6061-T6 aluminum alloy, with anodized coating on the surface, and CNC automatic processing technology is used to ensure high precision and stability, strict quality control, improve vehicle handling and stability, and prevent roll Brand Service: All wheel spacer kit comes complete with 2 Years

5x5 to 5x4.75 Wheel Adapters Specifications

Quantity: Four (4)

Thickness: 1" (25.4mm)

Vehicle Bolt Pattern: 5x4.5 (5x114.3mm)

Wheel Bolt Pattern: 5x4.75 (5x120.65mm)

Hub Bore: 73mm

Thread Pitch:1/2-20

Material: T6 Aerospace Grade Aluminum with 12.9 grade studs

PACKAGE INCLUDES

4 x wheel spacers (1" per unit)

20 x open end 1/2-20 lug nuts

2 x user manual.

Fitment

1987-2006 Wrangler YJ TJ (Unfit jk models)

1984-2013 Cherokee XJ KJ KK

2001-2013 Liberty TY KJ KK

1992-1998 Grand Cherokee ZJ

1986-1992 Comanche

1994-2014 M-ustang

1982-2012 Ranger

1990-2018 Explorer

2007-2014 Edge

1982-2012 Ranger

1991-2011 Crown Victoria

2003-2004 Mach 1

1998-2017 Falcon

Never remove factory installed studs on wheel spacer/adapter.

Never use impact wrench for wheel spacer/adapter installation.

Note: Please make sure that these are the correct application for your vehicle. We do not guarantee any fitment onto any vehicle,we only guarantee that you will receive the item described above.

This spacer adapter includes open-end lug nuts to secure the spacers onto your factory hubs

If your factory thread size is different from 1/2-20 - Need to purchase a set of open-end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation

Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to:

1) Shorten the factory studs

2) The wheels need to have open slots (cavities) between mounting holes.

3) Purchase a set of shorter studs and replace them with the factory studs