AR-PRO 8-3/8" Pool Light Lens Gasket with Stainless Pilot Screw, 2 Set | Compatible with Select Pentair Pool Lights, Replaces 79101600Z, Silicone($11.99Value)

Description

8-3/8" POOL LIGHT LENS GASKET: Designed as a replacement lens gasket for select compatible pool light fixtures using an 8-3/8" gasket. Match the gasket diameter, profile, fixture model, and housing dimensions to your existing light rather than relying on bulb size alone COMPATIBLE WITH SELECT PENTAIR LIGHT FIXTURES: Designed for select compatible Pentair pool light fixtures using replacement gasket 79101600Z/O-170 79101600, including verified IntelliBrite, AmerLite, and SAM configurations. Compatibility varies by fixture model and housing; this is not a universal pool light gasket SILICONE GASKET FOR A SECURE LENS SEAL: Made from silicone for use around the pool light lens and housing. Proper gasket compression and clamp tension help create the seal around the lens while accommodating exposure to pool water and temperature changes STAINLESS STEEL PILOT SCREW INCLUDED: Includes a stainless steel pilot screw designed as a replacement for part 79104800 on compatible fixtures. Use the included screw when its dimensions and thread configuration match your existing pilot screw; otherwise, retain the correct existing hardware INSTALL CORRECTLY & CHECK THE SOURCE OF LEAKS: Install the gasket without adhesive or sealant and tighten the tension wire clamp evenly around the face ring. If leaking continues after proper installation, inspect the strain relief at the rear of the light housing as another possible leak source

AR-PRO 8-3/8" Pool Light Lens Gasket with Stainless Pilot Screw is designed for select compatible pool light fixtures using this gasket size and profile.

Fit Information:
Gasket Size: 8-3/8"
Material: Silicone
Application: Pool Light Lens and Housing
Lens Gasket Replacement Reference: 79101600Z
Pilot Screw Replacement Reference: 79104800
Pilot Screw Material: Stainless Steel

Compatibility:
Designed for select compatible Pentair pool light fixtures, including verified IntelliBrite, AmerLite, and SAM configurations using matching gasket and housing specifications. Fixture compatibility should be determined by the light model, gasket dimensions and profile, housing design, and pilot screw specifications rather than bulb size alone.

Installation:
Do not apply adhesive or sealant to the gasket. Position the gasket correctly around the lens and tighten the tension wire clamp evenly around the face ring to provide proper compression. The included pilot screw may be used when its dimensions and thread configuration match the existing fixture.

Leak Check:
The lens gasket is not the only possible source of water intrusion. If leaking continues after correct gasket installation, inspect the strain relief at the rear of the light housing and other sealing points for possible water intrusion.