SHANJUE 5 Inch Wood Furniture Legs, Square Rubberwood Sofa Feet Replacement (Pack of 4) with 5/16" & M8 Bolts for Mid-Century Dresser, Ottoman,($26.99Value)

Description

HEAVY DUTY LOAD CAPACITY — Precision-engineered solid rubberwood supports up to 1,762 lbs per set (440 lbs per unit). This 5-inch replacement provides a stable foundation for heavy sofas and preventing structural collapse without using subjective quality claims. Universal Fit for American (Imperial) & Metric Furniture: Pre-assembled with a 5/16" hanger bolt and matching 5/16" flange nut plate for standard US furniture, includes an extra M8 replacement hanger bolt for metric furniture, plus an Allen wrench for fast, hassle-free bolt swapping; critical pre-install check: confirm your mounting hole diameter first – use the pre-installed 5/16" bolt for 8-9mm/5/16" holes, and the included M8 bolt for 10-12mm/M8 holes. OPTIMIZED SEAT HEIGHT CALCULATION — Designed for a target seat height of 16–17 inches. To confirm: measure current seat height, subtract existing leg, then add 5". The 5-inch clearance fits most robot vacuums (models 3.5–4" tall) and creates a moisture-resistant air gap. MULTI-FURNITURE SCENARIOS — Square tapered profile fits 12+ types including recliners, dressers, and MCM coffee tables. Compatible with mid-century modern and Scandinavian interiors. Note: Not recommended for flat-plate mounts or frames thinner than 1 inch. TOOL-FREE FINAL INSTALLATION — Complete kit includes 4x rubberwood parts, 2 sets of bolts, 16x screws, and 4x felt pads. Initial bolt swapping uses the included Allen wrench, while final installation is hand-tightened. Effectively reduces noise and prevents floor scratches.

Replacing worn-out or broken furniture legs shouldn't mean hours of guesswork. SHANJUE 5-inch square rubberwood legs are engineered for a straightforward swap — solid material, two bolt standards included, and hardware for the full installation in one package.

Built to carry the load. Each leg is machined from solid rubberwood with a reinforced metal insert nut pre-installed at the base. All 4 legs together are load-tested to support 1,762 lbs — sufficient for heavy sofas, sectionals, dressers, and bed frames under everyday household use.

Two bolt standards, one package — no guessing at the hardware store. Every leg ships with both a 5/16-inch hanger bolt (standard for most US-made furniture) and an M8 hanger bolt (standard for metric/imported furniture). Before you install: remove your existing leg and measure the threaded hole in your furniture frame. 10–12mm diameter = use the M8 bolt. 8–9mm diameter = use the 5/16" bolt. Use the included Allen wrench to thread your chosen bolt into the leg base. Then hand-tighten the leg directly into your furniture frame — no wrench needed for the final step.

Choose the right height before you order. The 5-inch leg is designed for a final sofa seat height of approximately 16–17 inches (actual result depends on your frame thickness). To find the right size: measure your current seat height, subtract your current leg height, and add 5. If the result matches your target seat height, the 5-inch option is correct. Not quite? Also available in 3", 4", 6", and 8" — select from the size options above.

Floor-friendly base, robot-vacuum clearance. A pre-installed pad on the base of each leg protects hardwood, tile, and laminate floors from scratches and reduces noise when furniture is shifted. The 5-inch height provides clearance for most standard robot vacuums (typically 3.5–4 inches tall).

What's in the box: 4 rubberwood legs | 4 pairs of hanger bolts (one 5/16" + one M8 per leg) | 16 mounting screws | 4 insert nuts | 4 felt pads | 1 Allen wrench.

Not compatible with: furniture using flat-plate or bracket-style mounts with no threaded hole, or frames thinner than 1 inch. If unsure about compatibility, contact us with your furniture model before ordering.

Available finishes: Brown . Confirm your color variant in cart before checkout.