6pcs Pro Micro for Atmega32U4 5V 16MHz Bootloadered IDE Micro USB Pro Micro Development Board Microcontroller Compatible for Pro Micro Serial($32.99Value)

Description

ATmega32U4 running at 5V/16MHz Pay attention to : 1.When you open the IDE software, could you please go to the tool and choose the board This board connects directly to the FTDI Basic Breakout board and supports auto-reset. On-Board Micro-USB connector for programming 4 x 10-bit ADC pins, 12 x Digital I/Os

Features: 

ATmega32U4 running at 5V/16MHz

Recommend power supply for board: 6-7V, less than 9V

On-Board micro-USB connector for programming

4 x 10-bit ADC pins, 12 x Digital I/Os

Rx and Tx Hardware Serial Connections

How to use?

1. Connected to computer. (If this module cannot be recognized by your computer, please refer to this link to install the driver)

2. Opened Ard IDE and loaded Blink sketch.

3. Set board to Leonardo and selected the appropriate COM port (It showed up in the list already identified as a Leonardo).

4. Connected an LED to pin 9 and modified the sketch accordingly.

5. Hit upload and within a few seconds having a blinking LED.

Package Includes:

3 x Pro Micro ATmega32U4 5V 16MHz Module