SVFISHKK WS2812B LED Strip SMD 5050 Individual Addressable 144Pixels/m 144Pixels WS282b IC RGB Pixel Strip Full Color Addressable LED Non-Waterproof($11.99Value)

Description

Dream full color Programmable LED Strip,WS2812B led, WS2812B IC Built in 5050SMD.256 brightness display and 24-bit color display.It comes with 3pin JST-SM connectors on both ends for easy installation and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want. INDIVIDUALLY ADDRESSABLE LED STRIP: WS2812b is the digitally-addressable pixels type of LED strip. Each SMD 5050 LED has a built-in integrated driver IC, which either allows you to control the color and brightness independently or is beneficial for you to add complex lighting effects to a project accordingly. And it is made of pure gold wire, which has long lifespan. HOW TO MAKE IT WORK? You need a 5V power supply and a pixel controller, or other controlling systems; 3.2ft 144leds require a 5V 9A 45W power supply to make it work(not included). Please don’t use higher than 6V; otherwise, it will destroy the entire strip. Also, each LED can be cut off individually without damaging the rest strip. WIDELY APPLICANTS: WS2812b multi-colored led strips can be applied to hotels, KTV, bar, game room, Christmas decorations to heighten the atmosphere, car/shop/home decoration, and so on Only Support DC5V.Never use DC12V or DC24V. Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Flash/LedEdit software. "

1. Led strip welded by 0.5m is very normal in an electronic product, not a quality problem. if you mind this, don't place order!

 2. WS2812B Led strip can be cut buy each ""one"" led chip! 

3. IP30: Non-Waterproof 

4. WS2812B Led Strip work withDC5V, and it need a WS2812B Led ControllerControl it. 

About how to choose Led Power Calculates The Whole Led Strip Watts:1. One Led Chip is About 0.3W, when you buy it is 1m 144Leds / m (Total Led Strip is 144Leds), so 0.3W * 144= 43.2W 

2. and T Its Led Strips Work 5V, So 45W / 5V =9A, We Know This Led Strips Better At Least 9A ...... 

Product Description: 

1. WS2812B Led Strip is Powered By ""5V Power Supply"" (Not Included) . 

2. 3-pin JST connector Include: Red: VCC, Withe: GND, Green: DATA.

 3. The strip has 3M tape on the back . Installation surface must be smooth, clean and dry.

 4. Led Strips Can Be Cut Between Each Led To Create Custom Lengths.

 5. Do not bend strips sharply. 

6. Longer Runs Should Be Powered From Both Ends To Red