Myard Post Base Plate for 6x6 Inches Wood Post | Provides Code Required 1 Inch Stand-Off from Concrete Ground, Anti-UV, Patio Decking, Porch, Railing($35.95Value)

Description

【Size】DIMENSIONS - 5.3'' x 5.3" x 1''; Quantity: 4 Pcs. The post base plate is suitable for wooden posts with the standard size of 6" x 6" (actual 5.5"x 5.5" in the market). Before making a purchase, please verify the dimensions of the wooden post. 【1" Standoff & Weather-Resistant】Ensures a mandatory 1-inch separation from concrete ground as per building codes. Weather-resistant and non-corrosive, the post base plate is suitable for both indoor and outdoor use. 【Upgrade Sturdy】Thickened sides for enhanced stability and comprehensive support. Four "X" reinforced ribs at the base for increased strength. Anti-UV engineering Nylon + 30% Glass Fiber, for better durability and longevity. The improvements give better support and make the product last longer. 【Easy to Install】Easily attaches to the base of solid wood posts and to concrete using threaded rods and epoxy: (1) Drill a 3/4-inch diameter hole, 10 inches into the center of the post. (2) Clean out sawdust. Fill the hole halfway with epoxy anchoring adhesive. (3) Insert the all-thread 5/8-inch anchor bolt rod while twisting it, and allow the epoxy to set and cure. (4) Secure the base plate to the post using four 0.148-inch by 3-inch nails. ★ Hardware and accessories are NOT included. 【Versatile Use】The 6x6 post base plate is designed for a range of applications where wooden post support is needed, including patios, pergolas, pavilions, handrails, benches, fences, gazebos, mailbox posts, porch railings, deck supports, as well as adding charm to doorways, gardens, courtyards, and porches. Compatible Part Numbers: CPS6, CPB66 ▼ UPGRADES - (1) Thickened sides. (2) Four "X" reinforced ribs added on the bottom. (3) Better materials used: Anti-UV engineering Nylon + 30% Glass Fiber. ▼ FEATURES - (1) Provides code required 1 inch stand-off from concrete ground. (2) Weather-resistant for indoor and outdoor use, non-corrosive. (3) Attaches to the bottom of the solid wood post and to concrete with threaded rod and epoxy. ▼ INSTALLATION - ***Hardwares and accessories excluded. (1) Drill a 3/4"-diameter hole, 10" into the center of the post. (2) Clean out sawdust. Fill hole halfway with epoxy anchoring adhesive. (3) Insert all-thread 5/8" anchor bolt rod while twisting the rod, and allow the epoxy to set and cure. (4) Secure base plate to post using four 0.148" x 3" nails. ▼ CROSS REFERENCE PART #: CPS4, CPB44