Intellinet 16-Port Gigabit Ethernet Switch, 16 x 10/100/1000 Mbps RJ45 Port | sixteen RJ45 jacks, 32 Gbps capacity, auto-sensing speeds, energy-saving($69.99Value)

Description

Connect up to 16 wired devices through 10/100/1000 Mbps Ethernet ports with auto-sensing speed selection and Auto-MDI/MDI-X uplink support. The unmanaged switch uses plug-and-play setup for desktops, computers, printers and other network equipment. Select manual VLAN mode to isolate ports 1 through 14 while keeping communication with ports 15 and 16. Manual Extend mode supports transmission distances up to 250 m (820 ft.) at a reduced 10 Mbps speed for longer wired links. Support busy wired networks with 32 Gbps switching capacity, store-and-forward architecture, 512 kB buffer memory and an 8,192-entry MAC address table. Jumbo frames up to 9 kB help accommodate larger Ethernet data packets. IEEE 802.3az Green Ethernet technology detects link status, deactivates unused ports and adjusts power output based on cable length. This helps reduce power use while maintaining network performance across active connections. Use the front-panel slide switch to select Normal, Flow Control Off, VLAN or Network Extend mode. The switch supports 802.3x flow control in full duplex and collision-based backpressure in half duplex for connected Ethernet devices. Place the compact desktop-format switch on a desk using its four rubber feet, or install it in a rack with the included 19-inch mounting brackets. Its rugged metal housing and fanless design support quiet operation in network workspaces. Connect Cat3, Cat5, Cat5e, Cat6 or Cat6a twisted-pair cabling through the 16 RJ45 ports. An internal 100–240 VAC power supply, grounding point and link/activity LEDs support practical installation and status monitoring, with a power cable and instructions Expand a wired network with 16 RJ45 Gigabit Ethernet ports supporting 10, 100, or 1000 Mbps connections. Each port automatically detects the connected device speed and includes Auto-MDIX for automatic uplink and crossover support, making setup straightforward without manual configuration. The compact desktop switch uses a rugged metal housing, fanless design for quiet operation, and rubber feet for stable placement. A 32 Gbps switching capacity, store-and-forward architecture, 512 kBytes of buffer memory, and support for up to 8,192 MAC address entries provide capacity for computers, printers, servers, and other Ethernet devices. Jumbo frames up to 9 kBytes and 802.3x flow control for full-duplex operation are supported, along with collision-based backpressure for half-duplex connections. Select operating modes from the front-panel slide switch: Normal, Flow Control Off, VLAN, or Network Extend. VLAN mode isolates ports 1 through 14 while allowing communication with ports 15 and 16. Network Extend mode supports transmission distances up to 820 feet at a reduced speed of 10 Mbps. Green Ethernet technology detects link status, deactivates unused ports, and adjusts power output according to cable length. The switch includes an internal 100–240 VAC, 50/60 Hz power supply, power cable, 19-inch rackmount brackets, four rubber feet, and instructions. A grounding point helps protect connected equipment from external electrical surges. It operates from 32 to 104°F and supports IEEE 802.3, 802.3u, 802.3ab, 802.3az, and 802.3x standards. Dimensions are 4.96 x 11.02 x 1.73 inches.