Handheld Electric Concrete Vibrator Tool, 1300W 4000 rpm Cement Remover Air Bubbles w/2m Rod($65.00Value)

Description

♥【High-end Material】The shell of the vibrator is made of aluminum, equipped with alloy gear and an iron galvanized rod head, which is wear-resistant, and is not easy to rust. Therefore, you can use it for a long time without frequent replacement. ♥【Large Work Area】The 2m/6.6ft length of this vibrator is convenient for you to work in a big area, and finish different projects. Moreover, with the long power cord, you don't have to worry about an outlet being too far away. The product can be widely used in repair, construction, concrete column, grape trellis pouring, highways, fences, bridges, etc. ♥【Exquisite Workmanship】The vibrator adopts plastic spraying technology to make the surface more smooth, the color more beautiful, and more textured. There are multiple heat dissipation holes on the rear of the vibrator, which can timely reduce the temperature of the motor during operation, prevent burns, and extend the service life of the motor. ♥【High Working Efficiency】The product is equipped with a 1300w pure copper motor, which can rotate at 4000 rpm. While reducing noise, it can also quickly solidify cement and remove all trapped bubbles, and increases the density of the concrete. ♥【Large Amplitude】The vibrating rod is made of a 40mm/ 1.57inch manganese steel strip and double steel wire braided hose, which is not easy to break, and is solid and durable. The head of the vibrating rod is quenched, with high hardness and amplitude of 1.1mm/0.04inch. So you don't have to wait for a long time. ♥【Handle】The handle made of Nylon conforms to the ergonomic design, allowing you to grasp it more comfortably and reduce the burden on your hands. The handle is equipped with a self-locking switch, which can make the machine operate for a long time and reduce hand fatigue.

Specification

Color: Slivery, Red

Surface Treatment: Plastic Spraying 

Material of Shell: Aluminum

Material of Handle: Nylon

Material of Gear: Alloy

Material of Rod Head: Iron Galvanized 

Plug Type: US Standard

Voltage: 110v

Power: 1300W

Speed: 4000 rpm

Rod length: 6.6 Ft/ 2m

Head Diameter: 1.4inch

Amplitude: 1.1mm/0.04inch

Max. Swing: 0.55mm/0.02inch

Motor Size: 32.8 * 8.8 * 15cm/5 * 3.5 * 5.9inch

Vibrating Rod Length: 200cm/78.9inch

Rod Head Length: 45cm/17.7inch,

Rod Head Diameter: 3.5cm/2inch

Nut Height: 4cm/2inch

Vibration: 14400 VPM

Net Weight: 8kg/17.64lbs

Gross Weight: 8.2kg/18.08lbs

Package Size: 68*45*10cm/26.77*17.72*3.84inch

Package Included

1*Concrete Vibrator

1*Copper Shaft Rod

Notes

1.After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the concrete vibrating rod to the ground, and after the vibrator makes a smooth and powerful chirping sound, you can carry out the pounding operation.

2.When the concrete vibrator works, the concrete vibrator should be inserted into the concrete vertically or at an angle, after vibrating for a certain period of time, the concrete vibrator should be pumped up and down when vibrating.

3.The vibrating rod should not be bent more than 50mm/1,97inch.

4.After working continuously for half an hour, the vibrating rod should stop for a while to prevent the machinery from heating up too much and damaging the machine parts.

5.Please contact the customer service at any time about the use and maintenance methods