Black Reflective Tape Oralite 5700 Reflects White 1/2" 1" 2" 4" 6" 8" 12" Type 1 Engineer Grade Glass Bead Adhesive Safety Tape (1/2" Inch, 30' Feet)($34.99Value)

Description

ENGINEER GRADE REFLECTIVE TAPE (EG) is great for smooth flat or smooth round surfaces like pipes, bollards, and bar gates Oralite EG is a Type I retro-reflective adhesive tape that is approximately 5.5 mil and has a permanent acrylic adhesive with a peel-off backing Black Reflects a Bright White 7-year minimum longevity Sold in 1/2" , 1" , 2" , 4" , 6" , 8" , 12" widths and 10' , 20' , 30' , or whole roll lengths. 12" Inch is great for vinyl plotters. Oralite Black Type 1 Reflective Tape ENGINEER GRADE REFLECTIVE TAPE (EG) is great for smooth flat or smooth round surfaces like a pipes, bollards, and bar gates. ELG is a Type I retro-reflective adhesive tape that is approximately 5.5 mil and has a permanent acrylic adhesive with a peel-off backing. It utilizes embedded microscopic glass beadlets to reflect light and is commonly used for reflective striping or markings on vehicles, bicycles, wheelchairs, bollards, & stock gates. It has a 7-year minimum longevity. On vehicles, it is best applied using a soapy water solution and a squeegee. For best results, the adhesive should be allowed to cure for about 48 hours. Sold in 1/2 1, 2, 4, 6, 8 and 12-inch widths. 10, 20, or 30-foot lengths a whole 150 foot roll. ASTM D4956 Type 1 Reflective Tape. Single-layer design meaning it will not delaminate like other reflective tapes. Rated for a 7-year outdoor life. Visible for hundreds of feet. Flexible and Conformable Very aggressive adhesive. Peel, stick, and press on with a soft cloth. (Clean dry smooth surface) Used to mark emergency vehicles, fire trucks, ambulances, helmets, loading dock areas, bollards, poles, dumpsters, gates, barricades, tractor-trailers, and more