POWERTEC 70360 4" Dust Collection Hose 90 Degree Elbow Connector with Blast Gate and Dust Control Flex Cuff, 1 Set($32.99Value)

Description

INCLUDES: (1) 4 Inch 90 Degree Elbow Dust Collection Fitting, (1) 4 inch Flexible Cuff Coupler with Steel Clamps, (1) 4 inch Blast Gate SPECS - 90 Degree Elbow: Overall size: 8-Inch x 8-Inch x 4-Inch. Features dual 4-inch nominal ends with actual tapered measurements 3-61/64-inches OD and 3-3/4-inch ID SPECS - Flex Cuff: 4-9/16" OD, 4" ID and 2-9/16" Length | Connects to 4 inch nominal outer diameter adapter or dust collection pipe SPECS - Blast Gate: Accepts 4" ID dust hose, port or vacuum fitting; 4" Nominal end measures 3-61/64" OD and 3-3/4" ID 90 Degree Elbow: Provides an airtight 90° (right-angle) connection for 4" ID dust collection hoses, pipes, and fittings, works seamlessly with woodworking tool dust ports and compatible POWERTEC hoses and attachments; note that to fit a 4" OD equipment port, a rubber coupling is required. Flex Cuff: Provides a perfectly sealed, airtight connection between two 4" OD dust collection equipment ports, pipes, or fittings; these reusable flex cuffs install easily and can be removed without the need for screws or duct tape. Blast Gate: Maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another. Will not connect directly to other 4” OD ports; please confirm that the actual listed size fits your application before ordering. If connecting to a 4” OD port, a Flex Cuff or similar device will be required. NOTE: To prevent clogging and the gate from sticking, this blast gate requires regular cleaning of the dust that builds up in the groove where the gate slides.