Electric Handheld Bottle Capping Machine, Bottle Capper Screwing Sealing Machine for 10-30mm/0.39-1.18inch Round Plastic Caps($50.00Value)

Description

Saving Labor: The bottle capping machine can let you get rid of the traditional laborious wringing of bottle caps by hand. Its torque is 2-30kg/4-66lbs, so it's very easy to use. You can greatly save manpower. High Efficiency: Depending on your proficiency, this electric bottle capping machine can screw 20-50 caps a minute, which is very efficient and can save you a lot of time. Low Noise: The motor parameters are reasonably selected, so it CHEs smoothly, and the noise when used is low. This can bring you a quiet environment. Forward and Reverse Design: This hand-held capping machine is equipped with a button on the top, which can achieve forward and reverse rotation with one click. It will be more convenient for you to use. Good Safety: Once the cap is completely tightened, the electric bottle capping machine will automatically stop the rotating head. Therefore the product is very safe and you can use it without worrying about safety problems.

Details

Silicone Rubber Rings: This electric bottle capping machine comes with two silicone rubber rings, which can flexibly tighten different sizes of caps.

Anti-break Wire Sheath: This electric bottle capping machine is equipped with an anti-break wire sheath, which makes the electric bottle capping machine not easy to break the wire and can extend the service life of the electric bottle capping machine.

Anti-pull cotton thread: The power cord has an anti-pull cotton thread inside, which greatly reduces the risk of pulling and breaking.

Specification

Color: Black, Red

Model: OS-600

Material: Plastic, Stainless Steel, Alloy Steel, Silicone

Power Type: Plug-in Type

Material Type: Solid, Liquid

Function: Sealing

Work Type: Electric Capping

Operation Forms: Handheld

Applicable Caps: Round

Bottle Height: Not Limited

Voltage: 110V

Power: 80W

Rotation Speed: 900r/min

Torque: 2-30kg/4-66lbs

Packaging Speed: 20-50 Bottles/min

Net weight: 1.2kg/2.6lbs

Gross Weight: 1.3kg/2.8lbs

Product Height: 24cm/9.45inch

Package Size: 28 x 15 x 10cm / 11 x 5 x 3inch

Suitable Cap Diameter: 10-30mm/0.39-1.18inch

Aluminum Capping Head Diameter: 47mm/1.85inch

Installation 

1. Unscrew the upper cover.

2. Install the silicone rubber ring.

3. Tighten the cover.

4. Insert the head of the electric screwdriver into the cover hole.

5. Tighten the screws to secure the cover.

6. The installation is complete.

Package Included

1 x Electric Bottle Capping Machine

1 x Balancer

1 x Aluminum Capping Head

2 x Silicone Rubber Rings

1 x Wrench

1 x English Manual

Other Accessories for Assembly