Partsflow Engine Coolant Thermostat Housing For Dodge Dakota 97-02 Jeep | Compatible With Jeep Cherokee 91-01 Comanche 91-92 Grand Cherokee 93-04($12.29Value)

Description

Part Number: 53006192, 902-306, CH5180 Ideal replacement - this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models; Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking; Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer Fitment: for DODGE DAKOTA 1997-2002; for JEEP CHEROKEE 1991-2001; for JEEP COMANCHE 1991-1992; for JEEP GRAND CHEROKEE 1993-2004; for JEEP WRANGLER 1991-2006 Function:The function of the thermostat is to keep the engine from overcooling. For example, after the engine is working normally, the temperature of the engine may be too low if there is no thermostat when it is driven in winter. At this time, the engine needs to temporarily stop water non-circulation to ensure that the engine temperature is not too low. Note: Please check the appearance and part number of the product before placing the order to confirm that it is suitable for your car, thank you;Warranty for 12 Months.

Fitment:

for DODGE DAKOTA 1997-2002

for JEEP CHEROKEE 1991-2001

for JEEP COMANCHE 1991-1992

for JEEP GRAND CHEROKEE 1993-2004

for JEEP WRANGLER 1991-2006

Part Number:

53006192, 902-306, CH5180

Know about the Thermostat Housing:

The Thermostat Housing:The thermostat is a valve that controls the flow path of the coolant. It is an automatic temperature regulating device, usually containing temperature sensing components, through thermal expansion or cold contraction to open and close the flow of air, gas or liquid.

Function:The function of the thermostat is to keep the engine from overcooling. For example, after the engine is working normally, the temperature of the engine may be too low if there is no thermostat when it is driven in winter. At this time, the engine needs to temporarily stop water non-circulation to ensure that the engine temperature is not too low.

Location:Generally, the coolant of the water cooling system flows in from the body and flows out from the cylinder head. Therefore, the thermostat is generally installed at the water inlet where the water pump is installed. This is the junction of hot and cold water, and the most sensitive place. Its opening temperature is the temperature of the cooling water in the engine block, while its closing temperature is the temperature of a small part of the cold water that flows from the radiator through the thermostat into the cylinder block. The volume and range of its adjustment are relatively compared. It is small, so its fineness of adjustment is relatively fine, and it will not cause large fluctuations in the temperature of the engine block to make the engine run smoothly.