RGBZONE 10pcs 2-Pin 8mm LED Strip to Wire Connectors and 10m/32.8ft 2 Pin Extension Wire for Waterproof or Non-Waterproof Single Color LED Strip($14.99Value)

Description

What you get: 10Pcs 2pin 8mm strip to wire connectors and 10m(32.8ft) 22wag LED extension cable. The cable is quite long and the included screwdriver can open the connector to use it again. Application: The 2 pin LED connector kit works for 8mm wide waterproof and non-waterproof 3528/2835 single color LED light strip(for IP20/IP65,not for IP67). It's perfect for connecting your LED lights and extending them to the places you need them. Premium material: Our LED wire is made of multiple copper core wrapped in upgraded PVC material. It is high conductivity, low resistance and anticorrosive. The LED connectors are made of PC material and tinned copper, they are durable, transparent and beautiful. Specifications: The Connectors: Rated Voltage: 0-36V, Rated Current: 0-5A. The Extension Wire: Rated Voltage: 0-100V, Rated Current: 0-2A. Easy to use, no soldering required: Make sure the positive and negative directions are correct. Connecting the wire end: Simply insert the connecting wire into the wire end of the connector and press down. Connecting the end of the light bar: align the front of the 2 welds of the light bar with the 2 metal pins of the connector, then close the cover. Specifications:
These 2 pin LED connector kit is suitable for 8mm waterproof and non-waterproof 3528/2835 single color LED light strip.
Please make sure your LED strip is 8mm wide with 2 solder points. It's not suitable for 10mm LED strips.

Connector Material: PC material, inned copper
Wire Material: plastic shell, copper wire
Rated current: 0-36V
Rated current: 0-5A
Connector Type: 2 pin
Working board width: 8mm

Installation Tips: No soldering required, please make sure the front and back are correct.
1. Cut the strips and wires to the desired length and open the connector cover.
2. Wire end connection: Just insert the connecting wire into the wire end of the connector and press it.
3. Connect the end of the strip: Align the 2 solder points of the strip with the front of the 2 metal pins of the connector, then close the cover, make sure the metal pins of the connector go through your 2 solder points LED strip .

Reminder:
1. Make sure the positive (+) ends of the two light bars match.
2. Please ensure that the welding point of your light contacts the copper pin of the connector.
3. When connecting the light strip, the glue on the back of the light strip does not need to be torn off.

Package content:
10pcs 8mm 2-pin LED connectors and 10m (32.8ft) extension cable.
1 screwdriver
(The included screwdriver is used to open the connector for reuse.)