O'SKOOL Cast Iron Router Table Extension Wing, 27 Inch by 16 Inch | For table saw extension setups; 11-3/4 x 9-1/4 in insert plate recess; fits O’($369.99Value)

Description

Space-saving table saw router extension: Replaces a table saw extension wing to add a dedicated routing surface beside the saw, helping integrate routing into the existing table-saw footprint instead of requiring a separate router table. Check your saw’s mounting-hole pattern before ordering, as fit varies by model 1-1/2 in thick, 50+ lb cast-iron work surface: The substantial cast-iron top provides a solid routing surface, while its machined, smooth-finished face gives stock a consistent working area as it moves across the table. Its weight also means two-person handling is recommended during installation Insert plate fit and mounting: The recess measures 11-3/4 x 9-1/4 in with 3/4 in radius corners and accepts plates up to 3/8 in thick. Compatible with the O’SKOOL router series, including the 3.5/4.2 Router Lift Systems. Recess size alone does not confirm mounting fit for other lifts or plates, so check securing-hole placement before ordering Fence, miter and fixture compatibility: Fence mounting slots are 21 in apart; the O’SKOOL 32 in Router Table Fence fits, while the 24 in Fence does not. For other fences, check mounting spacing and bolt-head fit. A 3/4 x 3/8 in miter slot and separate fixture slot support compatible routing accessories Installation, hardware & support: Mounting and plate-leveling hardware is included, while some table saw setups may require original fasteners, drilling, or shimming. After installation, check balance and stability and add support legs if the extension-wing setup is not adequately supported The O’SKOOL 27 x 16 in Cast Iron Router Table Extension Wing adds a dedicated routing surface beside a compatible table saw without requiring a separate standalone router table. Designed to replace a table saw extension wing, this cast iron router table extension helps integrate routing into the existing table-saw footprint—a practical setup for woodworkers who want router-table capability while making better use of available shop space. Built with a 1-1/2 in thick cast-iron top weighing over 50 lb, the router table top provides a substantial working surface for table-mounted routing. Its machined, smooth-finished face gives stock a consistent area to move across during use. The table includes a 3/4 x 3/8 in miter slot for a compatible miter gauge and a separate fixture slot for compatible jigs, feather boards, and routing accessories. Because T-bolt head profiles can vary, thread size alone does not confirm accessory fit; compare bolt-head dimensions with the slot profile before ordering. The insert plate recess measures 11-3/4 x 9-1/4 in with 3/4 in radius corners and accommodates insert plates up to 3/8 in thick. It is compatible with the O’SKOOL router series, including the 3.5 / 4.2 Router Lift Systems. For other router lifts or insert plates, matching the recess size does not automatically confirm mounting compatibility, so check the securing-hole placement and mounting method before ordering. Fence mounting slots are spaced 21 in apart. The O’SKOOL 32 in Router Table Fence fits this table, while the O’SKOOL 24 in Fence does not. For other router table fences, compare both mounting spacing and hardware fit. Table saw mounting-hole patterns and fastener locations vary by manufacturer, model, and year. Before installing this router table extension wing, compare your saw’s mounting holes and fence-rail mounting points with the dimensioned O’SKOOL mounting diagram. Some setups may require the saw’s original fasteners, supplied mounting hardware, drilling, shimming, or leveling adjustments. Use two people during removal and installation. After installation, check the table saw for balance and stability and add support legs if the completed extension-wing setup is not adequately supported. Mounting and insert-plate leveling hardware is included; router lift or insert plate, router, router table fence, table saw, support legs, miter gauge, feather boards, and other accessories shown are not included.Features a standard 27-inch depth and pre-drilled 13-1/2" bolt pattern. Offers a direct bolt-on fit for most 10-inch cabinet and hybrid table saws, such as SawStop (PCS/ICS/CNS), Grizzly (G0690/G1023RL), Powermatic (PM1000/PM2000), JET (XACTA/ProShop II), Harvey Alpha, and Shop Fox. (Note: Models such as Delta Unisaw and Laguna Fusion share the 27" depth but require minor drilling; not compatible with jobsite/benchtop saws).