U.S. Solid 3/4 in Stainless Steel Solenoid Valve, AC 110 V, Normally Closed, FKM Seal, 9.3 Cv, Low-Pressure Start, Junction Box, Semi-Direct, for($48.67Value)

Description

STAINLESS STEEL, DURABLE: A durable, leak-resistant stainless steel body takes higher pressure and temperature and suits water, including drinking water, plus gasoline, diesel, kerosene, gas, air, and oils FAST RESPONSE, OVER 1 MILLION CYCLES: Opens or closes in under 1 second when powered on or off for instant flow control, rated for over 1 million cycles under proper maintenance LOW-PRESSURE START FROM 0.1 BAR: A semi-direct design starts under minimal pressure, as low as 0.1 bar, so it works on low-pressure and near-zero-pressure lines that stall many pilot valves FKM SEAL TO 150 C: The FKM (fluoroelastomer) seal resists high temperatures over -10 to 150 °C (14 to 302 °F) and corrosive fuels, oils, and chemicals where NBR or EPDM seals would swell REDESIGNED JUNCTION BOX SERIES: This latest semi-direct series is redesigned for efficiency; a sealed junction box protects the wiring, passing 9.3 Cv up to 10 bar (145 psi), for irrigation, RO, home brewing, and fuel control The U.S. Solid 3/4 in stainless steel solenoid valve is a normally closed, semi-direct valve from the latest redesigned series, built for efficiency and durability. It opens or closes in under 1 second for instant flow control, rated for over 1 million cycles, and starts under minimal pressure as low as 0.1 bar, so it works on low-pressure and near-zero-pressure lines.

A durable, leak-resistant stainless steel body takes higher pressure and temperature and suits water, including drinking water, plus gasoline, diesel, kerosene, gas, air, and oils The FKM (fluoroelastomer) seal resists high temperatures over -10 to 150 °C (14 to 302 °F) and corrosive fuels and chemicals. It passes 9.3 Cv up to 10 bar (145 psi) on AC 110 V (22 VA), and a sealed junction box gives protected, tidy wiring for permanent installations. Use it for irrigation, reverse osmosis, home brewing, fuel and gas handling, and DIY projects. This is not a continuous-duty valve, so limit energizing to 8 hours per cycle.

Specifications:
Brand: U.S. Solid
Pipe Size: 3/4 in NPT female
Body Material: stainless steel
Seal: FKM (fluoroelastomer)
Operation: Normally Closed, semi-direct, low-pressure start from 0.1 bar
Voltage: AC 110 V
Power: 22 VA
Flow: 9.3 Cv
Working Pressure: up to 10 bar (145 psi)
Temperature: -10 to 150 °C (14 to 302 °F)
Fluid Viscosity: under 20 cSt
Wiring: junction box
Media: water (including drinking water), gasoline, diesel, kerosene, gas, air, oils
Duty: not continuous duty, up to 8 hours per cycle
Thread: NPT
Service Life: over 1 million cycles