CSH HSQ125 | Century Centurion PRO | Pool Spa Pump Motor | 1.25 HP 1.25 THP | 3450 RPM | 115/230V | 14.8/7.4A | 48Y Frame | Square Flange | 1-Speed |($299.95Value)

Description

Replacement identity: CSH HSQ125 Amazon listing for Century Centurion PRO single-speed pool and spa pump motor; use where the old motor calls for HSQ125 / C48AB45A01 specs Nameplate match points: 1.25 HP, 1.25 total HP, 3450 RPM, 230/115 V, 7.4/14.8 A, 60 Hz, 1 phase, 1.0 service factor, continuous duty, and 50 C ambient Mechanical fitment: 48Y square-flange pool pump frame, ODP open dripproof enclosure, CCW pump-end rotation, 0.625 in shaft diameter, 0.906 in extension, and 12.98 in overall length Installer-focused build: capacitor-start induction-run design, voltage change device, open terminal board, 7/16 in shaft-access path, Triple Seal pump-end bearing protection, and sealed 203 bearings Ordering check: motor only unless offer states otherwise; verify old nameplate HP x service factor, voltage, amps, frame, flange, shaft, rotation, seal kit, and local pool motor rules before purchase CSH HSQ125 is an Amazon-listed replacement pool and spa pump motor using the Century HSQ125 Centurion PRO motor platform for applications requiring a 1.25 HP, 1.25 total HP, 48Y square-flange motor with a threaded shaft.

Core ratings: 1.25 HP output, 0.93 kW, 3450 RPM, 230/115 V dual voltage, 7.4/14.8 A, 60 Hz, 1 phase, 1.0 service factor, continuous duty, and 50 C ambient rating.

Electrical and construction details: capacitor-start induction-run design, ODP open dripproof enclosure, automatic overload protection, Class F insulation, UL recognized, CSA marked, rolled-steel frame, ball bearings on both ends, and stainless steel shaft extension.

Mechanical fitment details: 48Y frame, square-flange pool pump configuration, horizontal motor orientation, counterclockwise pump-end rotation, threaded shaft type, 0.625 in shaft diameter, 0.906 in shaft extension, 9.00 in frame length, and 12.98 in overall length.

Installer-focused Centurion PRO features include sealed 203 bearings on both ends, open and accessible terminal board and wiring compartment, voltage change device, 7/16 in shaft-access path, and Triple Seal pump-end bearing protection.

Replacement context: the HSQ125 line drawing identifies model number C48AB45A01 and customer model number HSQ125. Use the old motor nameplate, pump model, and pump manufacturer documentation to confirm horsepower, total horsepower, voltage, amperage, frame, flange, shaft, rotation, speed, enclosure, and seal-plate requirements before ordering.

Important contents note: this listing is for the motor unless the seller offer specifically states otherwise. Pump seals, gaskets, impellers, cords, mounting hardware, seal kits, and installation accessories are not included unless shown in the offer. Replace the shaft seal as directed by the pump manufacturer during motor installation.

Not a universal replacement. Do not order by horsepower alone. Confirm the complete nameplate, 48Y square-flange fit, threaded-shaft dimensions, voltage-selection setup, wiring diagram, and local pool motor efficiency rules before purchase or installation.