235x235mm 2-Piece Holographic + Textured PEI Plate Set for K1 | 2 plates, 3 surface styles: fish-scale circles, shattered-glass confetti and textured($19.99Value)

Description

【2-PLATE SET, 3 DISTINCT SURFACES】 Get two 235 x 235 mm spring-steel build plates in one set: one double-sided holographic pattern plate with Fish Scale Circles on one side and Shattered Glass/Confetti on the other, plus one double-sided textured PEI plate. Choose the holographic surface for colorful first-layer transfers and display prints, or the textured PEI surface for strong adhesion, functional parts, prototypes and everyday models. 【REAL HOLOGRAPHIC FIRST-LAYER TRANSFER】 The holographic pattern plate transfers Fish Scale Circles or Shattered Glass/Confetti directly onto the bottom of the print, creating a bright decorative finish without painting or post-processing. It is optimized for PLA, PETG and TPU, with suggested bed temperatures of PLA 65–70°C, PETG 75–85°C and TPU 40–45°C. For best results, keep the holographic plate at or below 130°C. ABS, ASA, PC, PA and Nylon are not recommended on this surface. 【TEXTURED PEI FOR HIGH-TEMP AND FUNCTIONAL PRINTS】 Use the double-sided textured PEI plate when maximum adhesion, high-temperature performance and a durable textured finish matter. The plate is intended for temperatures up to 300°C and supports a wide range of materials, including PLA, PETG, PETG-CF, ABS, ASA, PC, PA/Nylon, PA-CF, TPU and PVA. Reference bed temperatures: PLA 60–65°C; PETG/PETG-CF 70–80°C; ABS/ASA 90–110°C; PC 100–120°C; PA/Nylon/PA-CF 110–120°C; TPU 30–45°C; PVA 45–60°C. Tune settings for your printer and filament. 【235 x 235 MM FIT FOR K1, ENDER 3 AND MORE】 Designed for 235 x 235 mm platforms, including Creality K1/K1C, Ender 3, Ender 3 V2, Ender 3 V2 Neo, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 S1, Ender 3 S1 Pro, Ender 5, Ender 5 S1, Ender 5 Pro, Elegoo Neptune 3/3 Pro/4/4 Pro, Sovol SV05/SV06/SV07, CP-01, CR-20 and CR20 Pro. Confirm your printer’s actual platform size before ordering. Package includes 2 build plates; magnetic base is not included. 【STAINLESS-STEEL CORE, EASY RELEASE】 Made with a stainless-steel spring core for flatness, elastic recovery, rust resistance and repeated use. The upgraded surface coating is designed for stronger adhesion, reliable first layers and resistance to bubbling. Before printing, remove the protective film, clean the plate with alcohol, install and level it carefully, and keep the nozzle from scratching the surface. For difficult or high-temperature prints, slow the first layer, stabilize chamber temperature or add a brim/glue when appropriate. Let the plate cool, then bend and release the model. Each plate is inspected before shipment. Ender 3 S1 Pro Build Plate 235x235mm Circle and Flake Patterns