HUAREW 110V Digital Temperature Controller Thermostat Outlet Socket($15.99Value)

Description

LCD Display : The newly upgraded 2.24-inch LCD screen is different from most other products on the market . The clear LCD display and power indicator lights allow you to see the controller’s status even in total darkness（Note: This product does not have backlight function） High performance : Temperature control range: -40°C~120°C/-72°F~176°F, temperature control accuracy: ± 1%AC 50/60 Hz. Output: Maximum 16A/3680W. Start temperature > stop temperature, cooling operation begins; Start temperature < stop temperature, heating operation begins Various Functions : 1.7M / 5.6FT NTC 10K temperature sensor probe; Heating/Refrigeration Function; F01-F04 Timing Function; -9.9~9.9℃ Temperature Calibration Function; Memory Function; Reset Function; Screen LockProtection (all current settings are saved after power off) Safe to use : Plug and play design, using highly conductive copper plate, copper rust resistance. Safety socket to prevent children from misinserting. Appearance using PC flame retardant material, high temperature flame retardant. Set the temperature range, place the probe, plug the heater/cooler into the marked outlet. Support heating and cooling modes, suitable for beginners and professional users Wide Range of Application : This temperature controlled outlet plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. It can also be used as a timer for cycle timing and countdown Specification:
Power Supply: AC 120V±15% 60Hz
Temperature control range: -40~248℉ (-40℃~120℃)
Control accuracy: ±1%
Sensor: NTC10K/B3950
Output: Max 16A/120V (Please use resistance load less than 16A, inductive load less than 2A.)
Timing accuracy: MAX 10minutes

Temperature control mode
Set start temperature and stop temperature, when start temperature > stop temperature, the thermostat outlet will work in cooling mode, and when start temperature < stop temperature, it will work in heating mode.

Backlight time setting
1. Press and hold the"UP"button and "DOWN"button at the same time into backlight time setting.
2. LCD displays bl-0 and flashes at the same time, Press the"UP"button and "DOWN"button to set the back light lighting time. (bL-0=10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=normally on.)
3. Press the "MODE"button to save the backlight time setting.
4.Default: bL-0(10 minutes).

F01-Cycle timer mode
The device works during ON time and stop working during OFF time. It will keep working in cycles. For example, set ON=0:05, OFF=0:02, this device will work for 5 minutes and stop working for 2 minutes, and then work again in cycles.

F02-countdown ON mode
The device starts to work after CD ON time ends. For example, set CD ON=0:05, the device starts to work after 5 minutes.

F03-countdown OFF mode
The device stop working after CD OFF time ends. For example, set CD OFF=0:05, the device works for 5 minutes and stop working forever after 5 minutes.

F04-countdown ON/OFF mode
The device starts to work after CD ON time ends and stop working after CD OFF time ends. For example, set CD ON=0:02, CD OFF=0:05, the device will start to work after 2 minutes, then work for 5 minutes and stop working forever.

Please note: After setting, press and hold "MODE" for 3 seconds to start the programme.