LNCHKA Air Pressure Regulator with Pressure Gauge(0-150PSI),Water Separator for Air Compressor Semi-Auto Drain 1/4 NPT Threaded Interface($28.99Value)

Description

{Conditions Of Use}:Air pressure regulator 1/4 npt/fuel water separator should meet the values specified As follows: Maximum pressure:145PSI,recommended pressure adjustment range:0-120PSI Suggest using a temperature of 41-140 ℉ Flow rate:18 SCFM (500 L/min),applicable to compressors with a power rating of 2.68 hp or less {Use Of Pressure Regulator}：Pull up the gray rotation button to control the pressure and adjust it to the desired pressure. Press the gray rotation button to maintain stable outlet pressure {Products}: The filter cup is made of transparent polycarbonate,which is a high-performance engineering plastic with high transparency,strong impact resistance,sound insulation,heat insulation,flame resistance and aging resistance The filter material uses a brass filter element,which is corrosion-resistant and filters air cleaner,resulting in a longer service life for the equipment The oil mist cup provides lubrication for externally connected equipment,making it work smoother and more durable {Advantage}:AN air pressure regulator is a component that does work by converting the elastic energy of compressed air into kinetic energy through the force generated by gas pressure or expansion.The structure of an air compressor regulator is simple,lightweight,and easy to install and maintain.The medium is air,which is less flammable than hydraulic medium,so it is safe to use. Suitable for use in:air compressor paint sprayer,pneumatic cylinder,badger airbrush {Air Compressor Semi-Duto Drain Valve}:Includes Semi-Auto Drain & Polycarbonate Bowl,0-150 PSI Gauge,2 x 1/4" NPT plug,pair of 1/4 NPT brass material rapidairconnectors,1 x Thread Seal Tape 1. Please pay attention to cleaning the connecting pipes and joints to avoid bringing dirt into the gas path during installation.
2. Please pay attention to whether the air flow direction is consistent with the direction indicated by the arrow on the body or not. Please make sure that the nozzle and tooth type are correct.
3. Pressure regulation: pull up the pressure adjusting knob and rotate it clockwise to increase the pressure. Turn it anticlockwise to decrease the pressure. Adjust it to the required pressure. Press the pressure adjusting knob to lock it.
4. Water drainage: when there is no air pressure, the water will be discharged automatically. When there is air pressure, push the drainage column upward to drain the water. After drainage, release the water column, and the drainage column will pop down automatically. When the water level exceeds the upper limit, please drain immediately, otherwise it will cause poor dehumidification.
5. Adjustment of oil volume: rotate the needle valve clockwise to reduce the amount of oil dripping, and to rotate the needle valve anticlockwise to increase the amount of oil dripping and adjust the air flow. When the needle valve is set, If the air flow rate increases, the amount of oil drops will also increase; if the air flow rate becomes smaller, the oil drop amount will also become smaller.
6. Refuelling method: close the air pipeline for refueling operation, turn the refueling nut anticlockwise. Please do not exceed 80% of the cup during refueling. After that , lock the refueling nut, and do not remove the oil cup directly for refueling.