4 Wheel Adapters 6x5.5 to 8x170 Fits 6 Lug Toyota Chevy Hub with 125mm Hub Centric Lip to Fit Super Duty Wheels($248.20Value)

Description

【Purpose】Convert from 6 lug vehicle to 8 lug wheel, meaning putting 8 lug wheels on 6 lug vehicle 【Fit Vehicle】Fit vehicles of 6x5.5" or 6x139.7mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels. 【Convert Wheel】Convert to wheel must be 8x170mm bolt pattern. Sold by 2 pairs (4 adapters) 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs. 【Attention】14x1.5 studs; 2" (50mm) thickness; 108mm center bore; Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vehicle studs. 【Mounting Lug Nuts】Open end mounting lug nuts 14x1.5 included to match vehicle studs

Product Information:

These two piece conversion type wheel adapters are used to convert 6 lug 5.5-inch (139.7mm) bolt pattern hub to fit wheels of 8 lug 170mm bolt pattern. Adapters are built with 125mm hub centric lip to support F250 or F350 Super Duty wheels for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a set of 4 for all four wheels.

Hub centric design for a snug fit on both the vehicles and factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations.

Snug Fit on 6x5.5-inch Pattern Hub Or Fit the Following Vehicles:

Chevy/GMC: All 6 lug Blazer, Silverado, Suburban, Tahoe
Toyota: All 6 lug
Nissan: Frontier , Xterra (up to 04), Pickup
Mitsubishi: 6 lug

Hub Centric Fit for Factory Wheels (or 125mm Bore wheels) Compatible with These Vehicles: 

Ford: Super Duty F250 (03-on), F350 (03-on)

For Ford Super Duty F250 F350 (99-02) - contact us before purchase; lug nuts changes are required

Adapter Specification:

Vehicle Bolt Pattern: 6x5.5-inch (139.7mm)
Wheel Bolt Pattern: 8x170mm
Studs Thread Size: 14x1.5
Hub Bore Size: 108mm
Hub Centric Lip: 125mm
Thickness: 2-inch (50mm)
Lug Torque: 95 ft-lbs
Black Allen Bolt Torque: 55 ft-lbs

Technical Notes:

If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.