HSSDTECH Laptop Rubber Feet Strips for DELL XPS 9370,9380,7390 P82G003,9305 | Laptop Bottom Case Nonskid Silicone Bumper Rubber Foot Replacement White($8.01Value)

Description

【Thick foot pad size 】23.1cm * 0.7cm * 0.3cm 【 Thin foot pad size】 23.1cm * 0.7cm * 0.1cm . Laptop Bottom Case Nonskid Silicone Bumper Rubber Foot Strips Compatible with Dell XPS 9370 , 9380 P82G002 ,7390 P82G003 ,9305 P82G004 ( Incompatible XPS 7390 2in1 ）Carefully check if your laptop is XPS 7390 2-in1 P103G001, if so, it is not compatible. Easy to use: There is adhesive on one side of the rubber strip,The adhesive on the Bumper Feet Strips of the release liner ensures that they are firmly attached to the bottom base of the laptop.Strong slip resistance ，excellent adhesion, and not easy to peel off.The effect is very good! You can also use a quick-drying glue to reinforce its contact with the notebook. 【You will get】2pcs Rubber Non-Slip Strips(One thick and one thin) Before you install the Rubber feet, please clean mounting location and dry them to prevent Rubber feet coming off. Rubber feet elevate the laptop slightly for better heat dissipation and are non-slip. 100% Brand new and high quality.Please refer to the description below for the installation steps
Compatible models：
FOR Dell XPS 9370 rubber feet
FOR Dell XPS 9380 P82G002 laptop bottom case rubber feet strips
FOR Dell XPS 7390 P82G003 laptop bottom case feet
FOR Dell XPS 9305 P82G004


Please refer to the following steps for installation

1: Before installation, please pry off the plastic tripod of the bottom shell (the plastic cover covered by the original rubber can be disassembled from the bottom shell) There are several plastic welding points inside that can be flattened and pushed out with a screwdriver

2: The groove needs to be cleaned thoroughly

3: Simply stick it in place