CellEver Magnetic for iPhone 15 Pro Case, Camera Protection Hot Pink | Fits iPhone 15 Pro only. Compatible with MagSafe, N52 magnets. Anti-yellowing($12.59Value)

Description

4,500 DROPS, 10 FEET, 0% PHONE DAMAGE IN TESTING: A flexible TPU frame over a hard polycarbonate back, three layers deep, with a shock-absorbing airbag in each of the four corners. It holds 30kg pressed on one point and 120kg spread across the back, and it exceeds military-grade drop protection. CAMERA AND SCREEN GUARDED: The camera shelf is raised and closed around every lens rather than left open at the corners, with a 3mm raised camera bezel and a 1.5mm raised bezel around the screen. The shelf is molded as part of the colored frame, not added on top. N52 MAGNET LOCK: A full ring of N52 magnets pulls the phone into place in one motion and holds a MagSafe battery pack, a card wallet, a car vent mount, a charging puck or a ring stand. Wireless charging runs at full speed straight through the case, so it never has to come off. HARD-COATED BACK, ANTI-YELLOWING: A white, skin-feel back panel under a very hard scratch-resistant coating, so it resists fingerprints, scratches and yellowing. The color sits in the opaque Hot Pink frame, and your phone reads softly through the back. Anti-slip stripes run down the side rails, and the side buttons stay covered rather than cut out, with a crisp click. FITS iPhone 15 Pro ONLY: The iPhone 15, 15 Plus, 15 Pro and 15 Pro Max are four different bodies, so check yours under Settings, then General, then About before you order. Not silicone, so it slides out of a pocket instead of dragging. One CellEver Cybermag case in the box, no screen protector. The CellEver Cybermag case is built in two parts, and it is worth knowing which part does what. The Hot Pink frame is opaque and carries the color. It wraps the sides and the camera shelf in a fine leather-grain texture, with anti-slip stripes molded into the rails where your fingers actually sit. The back panel is a different surface entirely: white, skin-feel, and finished with a very hard coating that is baked on rather than laid over it as a film, so there is no edge to lift and nothing to peel at the corners. Your phone reads softly through it, the Apple logo stays visible, and the MagSafe ring is printed on the back in the frame color so you can see where the magnets sit before you snap anything on. That coating is the part you live with longest. It is why the back resists fingerprints, resists scratching and resists yellowing, which counts for more on a phone you have already carried for a couple of years than on one straight out of the box. Behind it sit three layers and an airbag in all four corners, because a dropped phone almost never lands flat. The materials are TPU and polycarbonate: flexible where the case has to give, rigid where it has to hold its shape. Every Cybermag shell is tooled for one iPhone body rather than stretched across a series, which is why the fit line on this page names a single model.