YAMATIC Kink-Resistant Pressure Washer Hose 50 FT 1/4", 3200 PSI M22-14mm | OEM-Upgraded Replacement Hose With M22-14mm Brass Female Fittings Fit($32.99Value)

Description

[M22-14MM REPLACEMENT HOSE] Designed for pressure washers and spray guns with matching M22-14 mm male ports. Both hose ends use preinstalled M22-14 mm female fittings with rotating installation nuts. Hose only; no adapters included. [50 FT REACH 1/4 IN 3200 PSI] The 50 ft pressure washer hose provides more room for common residential cleaning routes. Its 1/4 in inner diameter supports working pressures up to 3200 PSI in matched electric or gas systems. [FOR VEHICLES AND HOME EXTERIORS] Route the hose around vehicles, driveways, patios, siding, decks, fences, and outdoor equipment. Water temperature rated up to 140°F. [RoHS COMPLAINT] Built with a PVC inner tube, fiber-braided reinforcement, and PVC outer cover for repeated residential pressure-washing tasks. Made with RoHS-compliant materials. [KINK-RESISTANT DESIGN] Fiber-braided reinforcement helps the PVC hose resist sharp kinks during normal routing. Fully uncoil it before connecting and pressurizing, avoid tight bends, and allow additional relaxing time in colder conditions. Is this the right replacement hose for my setup?
This 50 ft pressure washer hose is designed for a direct pump-to-gun connection when both the pressure washer and spray gun have M22-14 mm male ports. Both ends use the same M22-14 mm female fitting with a rotating installation nut. Confirm both ports before ordering.

What is included?
The package includes one pressure washer hose only. No adapters, spray gun, extension wand, 3/8 in Quick Connect fittings, or separate connectors are included.

What cleaning routes is it designed for?
The 50 ft length gives users more room to work around vehicles, driveways, patios, siding, decks, fences, and outdoor equipment without repositioning the pressure washer as often.

What pressure and construction does it use?
The 1/4 in hose supports working pressures up to 3200 PSI in matched electric or gas systems. A PVC inner tube, fiber-braided reinforcement, and PVC outer cover form the three-layer construction. The hose is made with RoHS-compliant materials and includes recycled material content.

What does the 8700 PSI test value mean?
The hose has been tested to an 8700 PSI burst pressure. This is a test value, not a working-pressure rating; 3200 PSI remains the maximum working pressure.

What water temperature can be used?
The hose is rated for water temperatures up to 140°F. Always follow the pressure washer manufacturer’s inlet-water requirements.

How should the hose be handled?
Fully uncoil the hose before connecting and pressurizing. Avoid sharp bends, allow more time for the PVC to relax in colder conditions, and keep it away from exhaust, sharp edges, and moving parts.

Can it extend another hose?
It is primarily a replacement hose. Extension use may require a separately purchased compatible male-to-male coupler; none is included.