Pico 2 W with Soldered Header Compatible with Raspberry Pi Pico 2 W Board | 2.4GHz 802.11n WIFI and Bluetooth 5.2, RP2350 Chip, Dual-Core&($16.31Value)

Description

This is the latest Pi Pico 2 W Microcontroller Board (with yellow pre-soldered header), which is upgraded hardware from Pico 2 with wireless communication, onboard antenna, onboard Infineon CYW43439 wireless chip,features 2.4GHz 802.11n WIFI and Bluetooth 5.2. Using Official RP2350 Chip. Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz. 520KB of SRAM, and 4MB of on-board Flash memory. Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 26 x multi-function GPIO pins. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels. Temperature sensor. 12 x Programmable I/O (PIO) state machines for custom peripheral support. This is the latest Pi Pico 2 W Microcontroller Board (with yellow pre-soldered header), which is upgraded hardware from Pico 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2.

1. Using Official RP2350 Chip. Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz.
520KB of SRAM, and 4MB of on-board Flash memory.
2. Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2.
3. Castellated module allows soldering direct to carrier boards.
4. USB 1.1 with device and host support.
5. Low-power sleep and dormant modes.
6. Drag-and-drop programming using mass storage over USB.
7. 26 x multi-function GPIO pins.
8. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels.
9. Temperature sensor.
10. 12 x Programmable I/O (PIO) state machines for custom peripheral support.

Package Content
RPi Pico 2 W with pre-soldered header (mono) x1
1*3PIN yellow pin header x1
USB-A to micro USB cable ~1.2m x1