Howarx 3D Effect Build Plate for Bambu Lab A1 X1 P1, Skynet & Starry | Double-Sided 257x257mm Flexible Spring-Steel Plate Quick-Release, Wipe-Clean,($14.99Value)

Description

【ONE PLATE TWO PATTERNS】: Front and back carry different 3D textures, Smooth Skynet on one face and Smooth Starry on the reverse, so a single double-sided plate gives two distinct looks for stylized prints such as phone cases or tool-style parts 【EASY TO REFRESH SURFACE】: If you touch the build plate by hand, wipe it with a damp paper towel or rinse it under near-boiling water, then dry it off, and a pattern dulled by skin oils generally comes back clear once it is cleaned 【SURFACE SETUP CARE TIPS】: Print with dry filament to limit warping or stringing, keep the surface clean using hot water and detergent, set the plate type to Smooth PEI or High Temp inside Bambu Studio, then on X1 models skip LIDAR or calibrate with a regular plate 【RECOMMENDED BED TEMPERATURES】: For dependable adhesion set the heated bed to roughly 60-65C on PLA, 35-45C on TPU, 70-90C on PETG, then 90-100C on ABS, and fine-tune a few degrees to match your specific filament brand or room 【IN THE BOX】: You receive one double-sided 3D effect spring steel build plate measuring 257x257mm with the Smooth Skynet and Smooth Starry faces, sized for Bambu Lab X1, X1C, X1E, A1, P1P, and P1S 3D printers ready to use The Howarx 3D Effect Build Plate is a double-sided flexible spring-steel sheet measuring 257×257mm, sized for Bambu Lab A1, X1 (X1/X1C/X1E), and P1 (P1P/P1S) printers. Each face carries a different 3D texture — Smooth Skynet on one side and Smooth Starry on the reverse — giving two distinct decorative finishes on a single plate, ideal for stylized prints such as phone cases. The quick-release magnetic plate pops prints off with a light flex and wipes clean; if a surface dulls from skin oils, rinse it under hot water and dry to refresh it. Set the plate type to Smooth PEI or High Temp in Bambu Studio and follow the recommended bed temperatures for each filament.