4pcs U Type Groove Pulley Nylon Guide Rolling Bearing 5x25.5x8.5mm U Groove Roller Wheel for Door Window, Blue($7.96Value)

Description

U Groove Bearing: I.D.=5mm, O.D.=25.5mm, Thickness=8.5mm, Groove width=6mm, Groove depth=3mm. These bearings are shielded on both sides to keep lubricant in Chromium Steel long-life bearings, smooth and low noise ABEC Tolerance 1 (P0), Z1 Noise Level for most general use U-type pulley bearing fits the rail track system. Widely used in door and window to track and drive mechanical equipment.

NOTE：

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

• Single-row, pre-lubricated, normal accuracy.
• Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
• With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
• Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance
• Can be used to build the track system or replace the wheel, widely used in door and window to track, or drive mechanical equipment.

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:

Shielded Type: Double Shielded

Inner Race/Outer Race Material: Chrome Steel (GCr15) / Nylon

Cage Material: Stamping Steel

Accuracy Class: P0 (ABEC1)