Onaweno DIN Rail Automatic Fire Extinguisher for Electrical Panels 1-pole | 35mm rail fire safety device for breaker boxes, fuse boxes and($22.90Value)

Description

Wide Application Range: This product is suitable for small distribution cabinets installed on DIN Rail 35mm, communication rooms, outdoor battery boxes, RV distribution cabinets, warehouse electrical cabinets and other small equipment with fire hazards Compact DIN Rail Installation: This product can be installed on DIN Rail 35mm, the size is similar to 1 Pole circuit breaker, and the fire extinguishing capacity is 0.1m (3.53cu ft), or about 0.4m*0.5m*0.5m(1.31ft*1.64ft*1.64ft) equivalent area Automatic Heat-Activated Trigger: This product is a hot start type. When the ambient temperature is 170 (338) or combustion occurs, it will automatically trigger within about 1-6 seconds, releasing inert gas including carbon dioxide to completely cover and isolate oxygen, thus terminating the combustion chain reaction Efficient and Reliable Performance: This product has a small size, no pressure in the storage tank, efficient and rapid startup, and can work normally at an ambient temperature of -40-85 Celsius (-40-185 Fahrenheit) Easy Installation Process: This product is easy to install. You can freely cut the length of the thermistor wire (heating wire) according to the installation environment. The pipe mouth can be facing up or down according to the actual situation. Pull the buckle open during installation, and push the buckle tight after installation to ensure that the device is fastened. You can choose multiple or multiple models according to the size of the distribution cabinet Enclosed Environment Requirement: This product is only suitable for use in closed/semi-closed environments and requires DIN Rail 35mm to be installed successfully Multi-Layer Fire Suppression Technology: The aerosol particles form a thick covering layer around the fire source while absorbing heat and reducing oxygen concentration through nitrogen and carbon dioxide release, providing comprehensive fire suppression This product is an aerosol-type device without a pressurized storage device. Its extinguishing mechanism is as follows: 1. **Oxygen Isolation:** The aerosol particles form a thick covering layer around the fire source, effectively isolating the flame from the surrounding air, depriving the flame of the oxygen needed for combustion, thereby inhibiting the continued combustion of the flame. 2. **Heat Absorption:** The aerosol absorbs a large amount of heat upon release, lowering the temperature of the fire and further weakening the flame's ability to burn. 3. **Oxygen Concentration Reduction:** The nitrogen and carbon dioxide in the extinguishing aerosol can reduce the oxygen concentration during combustion, further delaying the spread of the fire. **Overview:** Aerosol fire extinguishers are self-triggered fire extinguishers widely used in unattended protective equipment, such as electrical cabinets, inside new energy vehicle batteries, energy storage devices, old car batteries, and modified car interiors, as auxiliary fire extinguishing or fire delaying devices. **Warning:** This product is for use only in enclosed/semi-enclosed environments as a small fire extinguishing device. It can be used to extinguish or slow down the spread of fire, buy time for rescue, and can be used in conjunction with other large fire-fighting equipment to achieve joint protection.