AOJEL S300 Structural Metal Epoxy for Aluminum & Steel, 5-Pack, 8.45 oz | 2-Part Cold-Weld Metal Glue; Rigid Load-Bearing Repair; Waterproof, Oil &($79.77Value)

Description

1. REPAIR BEFORE REPLACE: AOJEL S300 is a 2-part structural metal epoxy system and aluminum repair epoxy for prepared aluminum, steel, stainless steel, cast iron and cast aluminum; rebuilds rigid brackets, housings and castings 2. CONTROL THE MIX, TRUST THE REPAIR: AOJEL Repair Control 7-Step Protocol: PREPARE, PURGE, MIX, BUILD, ALIGN, CLAMP, CURE; purge until Parts A and B flow evenly, discard the first uneven bead, then mix true 1:1 until uniform 3. 30 MINUTES TO GET IT RIGHT: The AOJEL 30 / 3-4 / 24 System gives up to 30 minutes at 77°F/25°C to fill, build, position, align and clamp; 3-4 hours to initial set; at least 24 hours before loading or finishing 4. COLD-WELD ALTERNATIVE, AOJEL BUILT-REPAIR METHOD: Rebuild rigid metal without flame, sparks or welding setup; extend beyond the damage, build a hard repair body and reinforce load-bearing rigid repairs with a metal patch, mesh or bracket when needed 5. BUILT TO RETURN PARTS TO SERVICE: After full cure, S300 is waterproof, oil resistant and heat resistant up to 392°F; the cured repair is drillable, sandable, fileable, shapeable and paintable 6. KEEP USEFUL PARTS WORKING: For cracked castings, pot metal, stripped bolt or thread holes, worn rigid parts and prepared non-pressure exterior oil-pan or crankcase areas; restore function, reduce downtime and avoid unnecessary replacement 7. PREP ONCE, MAKE THE REPAIR COUNT: Degrease and roughen the metal, dry-fit parts and stage clamps or reinforcement before mixing; cleaner application, easier alignment and fewer rushed decisions make the result more predictable 8. EVERYTHING NEEDED TO START: Each S300 unit includes one 1.69 oz / 50 ml dual cartridge, push rod and spatula; no extra applicator is required for standard repairs; a compatible dual-cartridge dispensing gun adds control for repeated or larger jobs 9. CONTROL THE QUANTITY, KEEP REPAIR WITHIN REACH: Each cartridge contains 1.69 oz / 50 ml. Mix only what the job requires, recap and store unmixed epoxy as directed; choose the 1-, 2-, 3- or 5-pack based on repair volume, multiple parts or workshop stock 10. HONEST ENGINEERING, CLEAR LIMITS: For rigid metal repairs only; not for PE, PP, PTFE, silicone, soft plastics, flexible or moving parts, torsion loads, fuel or brake lines, exhaust manifolds, internal engine cracks or pressure-critical systems AOJEL S300 is a 2-part structural metal epoxy repair system for rigid aluminum and metal repair. It bonds prepared aluminum, steel, stainless steel, cast iron, cast aluminum and pot metal, helping rebuild brackets, housings, castings, stripped bolt or thread holes, and localized non-pressure exterior oil-pan or crankcase damage when welding is difficult or impractical. REPAIR BEFORE REPLACE. S300 is a controlled cold-weld alternative designed to bond, fill and rebuild, not merely cover a crack. Follow the AOJEL Repair Control 7-Step Protocol: PREPARE, PURGE, MIX, BUILD, ALIGN, CLAMP and CURE. For a true 1:1 mix, clean and roughen the metal; purge until Parts A and B flow evenly; discard the first bead; then mix equal amounts until uniform. Extend epoxy beyond the damage, build sufficient thickness, align and clamp. Reinforce high-stress or rigid load-bearing repairs with a metal patch, mesh or bracket when needed. The AOJEL 30 / 3-4 / 24 System provides up to 30 minutes at 77°F/25°C to fill, build, align and clamp; 3-4 hours to initial set; and at least 24 hours before loading or finishing. After full cure, S300 is waterproof, oil resistant and heat resistant up to 392°F. The hard repair body can be drilled, sanded, filed, shaped and painted for a clean, professional result. Each S300 unit contains one 1.69 oz / 50 ml dual cartridge, one push rod and one mixing spatula. No additional applicator is required for standard repairs; a compatible dual-cartridge dispensing gun adds control for repeated or larger jobs. Choose the 1-, 2-, 3- or 5-pack based on repair volume, multiple parts or workshop stock Mix only what the job requires, recap the cartridge and store unmixed epoxy as directed. For prepared, rigid, non-flexing metal repairs only. Not for PE, PP, PTFE, silicone, soft plastics, flexible or moving parts, bending or torsion-loaded components, fuel or brake lines, exhaust manifolds, internal engine cracks or pressure-critical systems. MATERIAL. METHOD. CONTROL. REPAIR WITH PURPOSE.