Starbond 30-Minute Toughened Epoxy Pro Kit, 8 oz — Two Part Slow Cure Epoxy Glue — for Knife Handles, Golf Club Repair, Luthier, Woodworking, Metal &($22.99Value)

Description

FLEXIBLE-TOUGHENED EPOXY FOR AN IMPACT-RESISTANT BOND: Polyaminoamide hardener cures strong and slightly flexible, absorbing impact instead of cracking. In bench testing on hardwood, the bond outlasted the wood. Built for knife handles, golf shafts, guitar braces, and woodworking joints. 30 MINUTES TO POSITION, ALIGN & CLAMP: A full 30–35 minute working window before it begins to set. Long enough to seat a knife handle, rotate a golf shaft, reposition a guitar brace, or assemble a multi-part joint without rushing a single step. FULL CURE IN 12 HOURS, TWICE AS FAST AS THE LEADING TOUGHENED EPOXY: Functional handling at 7–10 hours. Maximum strength at 12. Ready the next morning, not the day after tomorrow. Bond strength verified at 6,898 psi tensile strength, ASTM-tested. PRO KIT WITH MIXING TOOLS INCLUDED: Correct mixing is the difference between a strong and weak bond. Includes a non-stick palette and anti-stick tool — fold slowly for 60–90 seconds, apply clean, no hunting for supplies. Cures clear, no yellowing. 1:1 MIX, BONDS WOOD, METAL, GLASS, CERAMIC AND CONCRETE: Equal parts by volume and weight, one measure each. Works on wood, metal, glass, ceramic, concrete, and fabric. Not recommended for plastics or rubber without testing. Cures light amber, finishes clear. Starbond 30-Minute Toughened Epoxy Pro Kit is a professional two-part epoxy adhesive designed for demanding repairs and assemblies that require strength, controlled flexibility, and extra positioning time. Unlike standard rigid epoxy that can become brittle under repeated stress, this slow-setting epoxy creates a strong, slightly flexible bond that helps absorb impact, torque, and vibration. With 30–35 minutes of working time, you can carefully position, rotate, align, and clamp complex parts without rushing. It is ideal as a knife handle epoxy, golf club shafting epoxy, fishing rod building epoxy, and adhesive for guitar repairs, woodworking joints, and multi-material assemblies. Use it to bond bone to steel, G10 scales to a knife tang, cork to a rod blank, graphite shafts to a hosel, and many other workshop components. The simple 1:1 mix ratio by volume or weight makes preparation straightforward. Measure equal parts, mix slowly for 60–90 seconds, and apply. The included non-stick mixing palette and anti-stick mixing tool help you prepare and spread the epoxy cleanly and consistently without searching for additional supplies. This clear epoxy adhesive bonds wood, metal, glass, ceramic, concrete, and fabric, making it a versatile choice for knifemakers, rod builders, golf club builders, woodworkers, craftsmen, repair professionals, and DIY enthusiasts. It reaches functional handling strength in approximately 7–10 hours at room temperature and fully cures in 12 hours, allowing many projects to be ready for use by the next morning. For best results, clean and prepare both surfaces before bonding, thoroughly mix equal parts, position the components within the available working time, and keep the assembly secured until cured. Plastic and rubber materials vary in composition and should be tested before use.