Electronics Repair Kit with Multi-bit Screwdriver Opening Pry Tool, 2 Set - Multicolor
1. The ergonomic handle of the screwdriver is for comfortable gripping, with a special anti-slip design and 360° rotation cap. 2. The magnetic tip is easy to hold screws.
$14.99
High Speed Steel Uncoated Machine Spiral Flute Thread Screw Taps
Specifications: Thread Size: 6-32 UNC Thread Length: 16mm / 0.63" Total Length: 51mm / 2.01" Square End Size: 3mm x 3mm / 0.12" x 0.12" Thread Tolerance Grade: H2 Material: HSS (High Speed Steel) Finish: Uncoated Cutting Direction: Right Hand Numbers of…
$16.98
Solid Carbide Straight Flute Machine Milling Chucking Reamer
Specification: Size: 4.1mm / 0.16" Total Length: 60mm / 2.36" Flute Length: 30mm / 1.18" Number of Flutes: 4 Flute Type: Straight Shank Type: Round Accuracy Grade: H7 Material: Solid Carbide (Tungsten Steel) Features: Hardened to 50 HRC Finish: Fine…
$19.46
$24.16
2pcs Precision Screwdriver 1.8mm Phillips Magnetic Head Pen Shape - Orange, Green
Size - 1.8mm cross head, 25mm / 0.98" bit length, 110mm / 4.33" total length. Material - The driver bit is made of S2 alloy steel material with paint finish, good toughness, wear-resistant and durable.
$11.99
5pcs S3 Magnetic Square Screwdriver Bit 1/4" Hex Shank 2" Length - Silver Tone
1. An excellent replacement for lost, bent or broken square screwdriver bits. 2. Made of S2 alloy steel, which is a high-hardness material commonly used in hardware. The magnetic tip can easily hold the screw when in use.
$13.49
5pcs Y3 Magnetic Tri-point Y Type Screwdriver Bit 1/4" Hex Shank 2" Length - Silver Tone
1. An excellent replacement for lost, bent or broken Y-type screwdriver bits. 2. Made of S2 alloy steel, which is a high-hardness material commonly used in hardware. The magnetic tip can easily hold the screw when in use.
Carbon Brushes 0.6x0.31x2.95 Inch for Electric Motors Power Tool 10Pcs - 0.6x0.31x2.95 Inch
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite.
$7.99
O-Ring 45 Degree Pick Oil Seal Gasket Precision Puller Remover Tool
The 45 degrees pick is designed for removing and installing O-rings and other small components in tight spaces, such as cylinder heads, engine blocks, and transmission housings.
$9.49
10pcs 3mm Mini Phillips Screwdriver for Watch Electronics Repair (Red) - Red
Size - 3mm cross head, 3.35" (85mm) total length. Durable - The shaft is nickel plated for corrosion and rust resistance, providing durability and longevity.
$9.99
100Pcs 0510 Color Ring Inductor 10uH 1W Axial RF Choke Coil Inductor
Color Rings:The first two of these represent a two-digit significant number. The third band represents the multiplier. The inductance is calculated by multiplying the significant number by ten to the power of the value of the third band.
Chucking Machine Reamer Carbide Tip Straight Flute High Speed Steel Tool
Chucking Reamer: Size: ; tolerance: ; overall length: . Features just the base substrate without any additional coatings, good for wide ranges of applications Material: Carbide tip with sharp cutting edge.
$24.98
2pcs T25 Magnetic Security Impact Torx Screwdriver Bit 1/4" Hex Shank 4" Length - Black, Red
1. An excellent replacement for lost, bent or broken Torx tamper-resistant screwdriver bits. 2. Made of S2 alloy steel, which is a high-hardness material commonly used in hardware.
$14.49
2pcs Precision Torx Screwdriver T8 Star Head Swivel Lid Non-slip Plastic Handle - Black, Purple
Size - Shaft Size: 3mm x 25mm / 0.12" x 0.98" (D*L), Overall Length: 109mm / 4.29".
Precision Screwdriver T2 Torx Magnetic Head Manual Pen Shape Screw Driver - Green
Size - T2 star head, 25mm / 0.98" bit length, 110mm / 4.33" total length. Material - The driver bit is made of S2 alloy steel material with paint finish, good toughness, wear-resistant and durable.
Milescraft 12280003 Router Bushing Set, Silver
Highlights: Material : Carbon Steel Color : Silver Number in Package : 9 pieces Boxed Usage : Dovetailing, sign making and inlay routing Bushing Sizes (Outer Diameters) : 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" and 51/64" Compatible with all router…
$37.69
10.6mm H7 Tungsten Carbide Tip Lathe Machine Chucking Reamer
Size - Cutting diameter: 10.6mm / 0.417"; accuracy class: H7; cutting flute length: 18mm / 0.71"; shank diameter: 10mm / 0.39"; 110mm / 4.33"; cutting direction: right hand Material - C1/K30 tungsten carbide is a tungsten-cobalt carbide with an average…
$12.99
4.2mm H7 Tungsten Carbide Tip Lathe Machine Chucking Reamer
Size - Cutting diameter: 4.2mm / 0.165"; accuracy class: H7; cutting flute length: 15mm / 0.59"; shank diameter: 4.3mm / 0.17"; 80mm / 3.15"; cutting direction: right hand Material - C1/K30 tungsten carbide is a tungsten-cobalt carbide with an average…
Carbon Brushes 0.63x0.51x4.41Inch for Electric Motors Power Tool 10Pcs - 0.63x0.51x4.41 Inch
$11.49
$19.38
